Preparations For Use - LG SAHSBP30GA0 Owner's Manual

PREPARATIONS FOR USE

* This Steamer is an electronic wave device suitable for use at home and can be used in any
region.
1
Put the Water Tank out and fill it with
water.
- Fill the water to a point between full and
1/2 level.
Uncover the steamer body.
Take the water tank out.
Unscrew the
water tank cap.
!
CAUTION
• After filling with water, tightly screw
the cap back on the tank and make
sure water does not leak.
PREPARATIONS FOR USE
2
Attach the water tank back to the body and
then the cap to the tank.
Take the slot of the body cover
close to the nozzle, fix the rear
first into the nozzle and insert it
*
Again, it's easier to fix it, first, into the rear
of the body cover.
!
CAUTION
• Make sure the spray cover, scale filter
and Water channel cover are installed
correctly and then install the water tank.
incorrect installation may cause insuffi-
cient humidification or other failures.
3
Plug the power cord into the outlet.
!
CAUTION
• If alien materials or moisture is found
on the plug pin, remove them first.
to the arrow's direction.
9