End Of Programme - Unloading The Drum; End Of Programme; Unloading The Drum; Observe Any Maintenance Notes - Miele PDR 908 HP Marine Operating And Installation Instructions

Heat-pump dryer
Table of Contents

Advertisement

6. End of programme – unloading the drum

End of programme

The laundry will be cooled down shortly
before the end of the programme. The
laundry can be unloaded.
Finish
lights up
If Anti-crease * was selected, the
drum will rotate in intervals. This minim-
ises creasing if the laundry cannot be
removed from the machine immediately.
* The anti-crease function is deactiv-
ated as standard.
The tumble dryer will switch off auto-
matically 15 minutes after the end of a
programme.
34

Unloading the drum

 Open the door.
 Remove everything from the drum.
Items left in the tumble dryer could
be damaged by overdrying when the
tumble dryer is used the next time.
Always remove all items from the
drum.
 Switch the tumble dryer off.
Observe any maintenance
notes
This tumble dryer requires regular
maintenance, particularly if it is used
on a continuous basis.
Tip: Please see "Cleaning and care" for
details. Read the "Cleaning the appli-
ance at the correct intervals" section
first.

Advertisement

Table of Contents
loading

Table of Contents