Power Evaluation; Guidance Bar; Settings; Additional Journey Information For Eshift Shimano Di2 And Rohloff - Bosch Bulls Cross Lite Evo Operating Instructions Manual

.
Level of assistance Use
O F F When the drive system is switched on,
the motor assistance is switched off.
The pedelec can be used like a normal
bicycle by simply pedalling. The push
assist system cannot be activated.
EC O Limited assistance with maximum
efficiency for maximum range
T O UR Constant assistance, for long-range
tours
EM TB Optimum assistance on any terrain,
sporty start-up, improved dynamics and
maximum performance.
T UR BO Maximum assistance up to high
pedalling frequencies, for sport riding
Table 36: Overview of levels of assistance

3.6.4.6 Power evaluation

The power evaluation provides you with a graphic
display of the current speed (white bar) in relation
to the average speed.
You can see directly if your current speed is above
or below your average speed
Left of the line = below average speed;
right of the line = above average speed.

3.6.4.7 Guidance bar

The guidance bar will tell you which screen you
are currently displaying. Your current screen is
highlighted. You can use the <- and >- buttons to
switch to other screens.

3.6.4.8 Settings

You use the S T AT U S S C R E E N to access the
S ET TI N G S . You cannot open and adjust the
S ET TI N G S while riding.
You can use the plus button (4) and the minus
button (6) to select the required setting and use
the select button to open it and other further sub-
menus. You can use the Browse back button in
the current settings menu to return to the previous
menu.
MY20B01-22_1.0_21.06.2019
You will find the following superior sections on the
first navigation level:
Screen display Function
R EG IS TR AT IO N Information on registration, at a later
stage
M Y EB IKE Settings for your pedelec:
You can set counters such as daily
mileage and average values
automatically or manually to "0" and also
reset the range. You can change the
wheel circumference value that the
manufacturer pre-set by ± 5%. If your
pedelec is equipped with eShift, you can
also configure your eShift system here.
The pedelec manufacturer or specialist
dealer can enter a mileage and/or period
for the servicing date. The due date for
your service is displayed under <Service
(next pedelec service): [DD. Mon.
YYYY] or at [xxxxx][km]>. The bike
components page shows you the
respective component serial numbers,
hardware and software versions and
other specifications relevant for
components.
M Y PR O F IL E The active user's details
BL UE TO O T H Switching the Bluetooth® function on
and off:
Connected devices are shown.
SY S S ETT I NG S A list of options to adjust your on-board
computer: You can set the speed and
distance in kilometres or miles and
display the clock in 12-hour or 24-hour
format. You can also select the time,
date and time zone and set your
required language. You can reset Kiox
to the factory settings, execute a
software update (if available) and select
a black or white design.
I NF O R MAT IO N Information on your Kiox: Information on
FAQs (frequently asked questions),
certifications, contact details,
information on licences.

3.6.4.9 Additional journey information for

eShift Shimano DI2 and Rohloff
Only applies to pedelecs with this equipment
The gear or shift mode (Manual M/Automatic A) is
always displayed on the start screen.
If you are currently viewing another screen, the
gear is displayed briefly when the gear is
changed. Since the drive unit detects the gear
shift and consequently reduces motor assistance
briefly, it is also possible to switch gears under
load or on hills.
If the pedelec is brought to a halt from a speed
greater than 10 km/h, the system can
automatically switch back to a pre-set start gear.
Overview
36