Cab Maintenance
Cleaning the Cab
Important:
Use care around the cab seals and
lights
(Figure
132). If you are using a pressure
washer, keep the washer wand at least 0.6 m (2 ft)
away from the machine. Do not use the pressure
washer directly on the cab seals and lights or
under the rear overhang.
Figure 132
1. Seal
2. Light
Cleaning the Cab Air Filters
Service Interval: Every 250 hours
1.
Remove the screws and grates from both the
in-cab and rear cab air filters
Figure
134).
g034330
3. Keep wand 0.6 m (2 ft)
away.
4. Do not pressure-wash
under the rear overhang.
(Figure 133
and
1. Filter
2. Grate
Rear Cab Air Filter
1. Filter
2. Grate
2.
Clean the filters by blowing clean, oil-free,
compressed air through them.
Important:
If either filter has a hole, tear, or
other damage, replace the filter.
3.
Install the filters and the grate with the
thumbscrews.
86
Figure 133
In-Cab Air Filter
3. Screw
Figure 134
3. Screw
g028378
g028379