Table of Contents
Advertisement
Preparing the worktop
Make the worktop cut-out as shown
in "Building-in dimensions" or as
calculated (see "Installing several
ProLine elements"). Remember to
maintain the minimum safety
distances (see "Safety distances").
Wooden worktops
Seal the cut surfaces of wooden
worktops with a suitable heat-
resistant sealant to avoid swelling
caused by moisture. The sealant
must be heat-resistant.
Make sure the sealant does not
come into contact with the top
surface of the worktop.
Position the spring clamps and
spacer bars at the top edge of the
cut-out in the positions shown in the
illustrations.
Secure the spring clamps and
spacer bars with the 3.5 x 25 mm
wood screws supplied.
Installation
45
Advertisement
Table of Contents
