Sharp SWD-77EH-BK Quick Start Manual page 6

ASSEMBLY
Keep plastic bags away from children.
1. Remove dispenser from packaging.
2. Unpack the drip tray and insert into the dispenser.
As shown in figure
3. Remove the bottle receptacle from packaging and insert into
the stainless steel cold tank . As shown in figure
4. Properly dispose all packaging.
5. Find a location for your water cooler that is protected from
direct sunlight and other sources of heat. Like all other water
coolers, prolonged exposure to sunlight will discolor the
plastic exterior Place the cooler on a flat, level surface
6. To ensure the cooler is level, adjust its feet by rotating them,
adjusting 4 feet first and slightly adjust the 5th foot last.
As shown in figure
7. Make sure the back of your water cooler is at least 4 inches
away from the wall. Keep a minimum distance of at least 4
inches on each side of your water cooler free. Keep items
such as papers, clothing, and furniture at a safe distance.
As shown in figure
8. This cooler is designed and built for indoor use only. Room
temperature should not exceed 37°C /99°F.
6