Example Of Configuration When Fp0H Is Originator And Target - Panasonic AFP0HC32ET User Manual

Cyclic Communication

2.2.3 Example of Configuration When FP0H is Originator and Target

Example of Configuration When FP0H is Originator and Target
Originator 1
Connection 1
Sends data to FP7.
Connection 3
Receives data.
Low-order PLC
Input Only
Target 2
In the example, the FP0H uses five connections.
Set the FP0H as below to send/receive data with the high-order FP7.
• Register the FP7 in the scan list and set the connection information.
• Register the I/O map for connecting the FP7 and set the tag/instance information.
Set the FP0H as below to receive data from low-order devices (low-order PLC, I/O devices A
and B). When the connection with a target is "Exclusive Owner", data can be sent and
received.
• Register the low-order PLC, I/O devices A and B in the scan list and set the connection
information.
2-8
FP7
Target 1
Connection 2
Sends data from FP7.
FP0H
FP0H
Connection 4
Receives data.
I/O device A
Input Only
Target 3
Connection 5
Sends and Receives data.
I/O device B
Exclusive Owner
Target 4