Table of Contents
Advertisement
2. Installation
Side mounting and ceiling mounting
For Protected-model
26
: When mounting the Manipulator on a wall or ceiling, for safety
purposes, attach the support to the Manipulator base to prevent the
Manipulator from falling. If the Manipulator falls, it is extremely
hazardous and may result in serious bodily injury and/or severe
equipment damage to the robot system.
: Connect the power cable connection and the signal cable connector to
the Manipulator immediately after the Manipulator installation. The
Manipulator without connecting them may result in electric shock
and/or malfunction of the robot system as it cannot ensure IP65.
RC520 Safety and Installation Rev.2
Advertisement
Table of Contents
