Security Setup Menu; Table B-6 Ami Bios Security Menu - GE V7768 Hardware Reference Manual

B.6 Security Setup Menu
86 V7768/V7769 Hardware Reference Manual
The ezPORT setup provides both a Supervisor and a User password. If you use
both passwords, the Supervisor password must be set first.
The system can be configured so that all users must enter a password every time
the system boots or when ezPORT setup is executed, using either the Supervisor
password or User password.

Table B-6 AMI BIOS Security Menu

Main Advanced
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
Clear User Password
Boot Sector Virus Protection
002.53 (C) Copyright 1985-2002, American Megatrends, Inc.
To reset the security in the case of a forgotten password you must clear the
NVRAM and reconfigure.
Refer to Chapter 1 "Installation and Setup" for how to clear the CMOS password.
BIOS SETUP UTILITY
PCIPnP Boot
: Not Installed
: Not Installed
[Disabled]
Security Chipset Exit
Install or Change the
password.
←→
Select Screen
↑↓
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit