Preparing A Sample For Fluorescence Imaging - GE Amersham Typhoon Operating Instructions Manual

6 Operation
6.2 Preparing the sample

6.2.1 Preparing a sample for fluorescence imaging

6.2.1 Preparing a sample for fluorescence imaging
Introduction
This section describes how to prepare a fluorescent sample for scanning.
Prepare a gel or membrane for
fluorescence imaging
Follow the steps below to prepare a gel or membrane sample for fluorescence imaging.
Step
1
2
104
Action
Place a gel or membrane on the fluor stage.
Remove any air bubbles between the gel or membrane and the stage.
Amersham Typhoon Operating Instructions 29193226 AC