2.1.2 Setting of Mode Switch
Setting of the mode switch
Item
No.
1
Resolution
2
and FP0-A21-
compatible
12-bit mode
input range
3
The number
4
of converted
CH
Input averaging
5
(Note 1): When the both switch No.1 and No.2 are OFF, the voltage/current is switched by the connection method.
(Note 2): This has been implemented in version 1.2 or later. In version 1.1 or earlier, this is reserved for the system
(not available).
(Note 3): In the 14-bit mode, the input range is set by writing into the operation memory WY with a user program.
(Note 4): All the switches are set to OFF at the factory.
(Note 5): The switch settings will be valid when the power is turned ON from OFF. The settings will not change if the
operation power supply is switched when it is ON.
Settings
OFF
ON
OFF
OFF
FP0-A80-
FP0-A80-
compatible
compatible
12-bit mode
12-bit mode
0 to 5V/0 to 20mA
-10 to +10V
(Note 1)
OFF
ON
OFF
OFF
2ch
4ch
(CH0-CH1)
(CH0-CH3)
OFF: Averaging Not performed, ON: Averaging Performed
2.1 Analog Input Unit (FP0R-AD4/AD8)
OFF
ON
FP0-A80-
compatible
12-bit mode
-100 to +100mV
(Note 2)
OFF
ON
6ch
(CH0-CH5)
ON
ON
14-bit mode
(Note 3)
ON
ON
8ch
(CH0-CH7)
2-3