8.6. MODEM CARD IS OUT OF ORDER 3.6. CAUTION 8.7. MAIN CARD IS OUT OF ORDER 3.7. FITTING A PLUG TO THE MAINS LEAD (KX-TVM200E) 9 TERMINAL GUIDE OF ICS, TRANSISTORS AND DIODES 10 HOW TO REPLACE A FLAT PACKAGE IC 4 SYSTEM SPECIFICATION 10.1.
Page 3
KX-TVM200E / KX-TVM200NE 18.7. REPLACEMENT PARTS LIST (KX-TVM204X) 19.3. TERMINAL GUIDE OF ICS, TRANSISTORS AND 18.8. MEMO DIODES 18.9. FOR THE SCHEMATIC DIAGRAM 19.4. CABINET AND ELECTRICAL PARTS 18.10. SCHEMATIC DIAGRAM (KX-TVM204X) 19.5. ACCESSORIES AND PACKING MATERIALS 18.11. PRINTED CIRCUIT BOARD (KX-TVM204X) 19.6.
KX-TVM200E / KX-TVM200NE 1 ABOUT LEAD FREE SOLDER (PbF: Pb free) Note: In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that contains lead. We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver, (Ag), and Copper, (Cu).
KX-TVM200E / KX-TVM200NE MODEM (KX-TVM296NE) 2 FOR SERVICE TECHNICIANS ICs and LSIs are vulnerable to static electricity. When repairing, the following precautions will help prevent recurring malfunctions. 1. Cover the plastic parts boxes with aluminum foil. 2. Ground the soldering irons.
KX-TVM200E / KX-TVM200NE 3 CAUTION 3.1. CAUTION When you mention the serial number, write down all 11 digits. The serial number may be found on the label affixed to the bottom of the unit. 3.2. SAFETY PRECAUTIONS 1. Before servicing, unplug the power cord to prevent an electric shock.
KX-TVM200E / KX-TVM200NE 3.4. WARNING Guidelines for handling HDD 1. HDD must be handled standing on rubber insulating. 2. Operator must wear grounding strap at when handling HDD. 3. Do not touch circuit. 4. Metal frame and HDD must be assembled with shock-proofed torque controlled screwdriver. (Loosing torque 0.4~0.6n. m) 5.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dialer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
KX-TVM200E / KX-TVM200NE 4 SYSTEM SPECIFICATION 4.1. SPECIFICATIONS Specification KX-TVM200 Hardware Available Port Cards 4-Port Digital Expansion Card (KX-TVM204) Number of Port Card Slots Aditional PBX Interface VM Link (currently unavailable) Data Ports USB (built-in), LAN (built-in), Modem (optional) Additional Hardware...
4.2.1. System Outline The Panasonic Voice Processing System (VPS) is a voice prompted, menu-driven system which provides fully automated call transfer (to an extension or mailbox), and voice message receiving and delivery service. Even first time users can easily reach their desired extension or mailbox by following step-by-step voice instructions.
KX-TVM200E / KX-TVM200NE 4.2.1.5. Voice Mail (VM) Menu Subscribers can operate (retrieve messages or set the parameters) by using navigation key or soft keys on the PT with LCD menu. VM Menu supports all subscriber service. [PT Model] KX-T7636/T7633/T7630 (DPT) KX-NT136 (IP-PT) 4.2.1.6.
KX-TVM200E / KX-TVM200NE 4.7. CONNECTION EXAMPLES DPT Integration The KX-TVM200 supports DPT Integration only, therefore it must be connected to the digital extension ports of the PBX. Each VPS jack provides 2 VPS ports and can handle 1 call per port.
KX-TVM200E / KX-TVM200NE 4.8. CONNECTING THE AC ADAPTOR 1. Plug the DC connector of the AC adaptor into DC IN. 2. Confirm that the VPS power switch is in the "OFF" position, then plug the AC cord into the AC adaptor, then plug the other end...
PBX CONNECTIONS 4.9.1. Connecting to the PBX One jack of the VPS can be connected to 1 jack of the PBX. Use a 4-conductor cable for connection with a Panasonic KX-TD series or KX-TDA series PBX that uses DPT Integration. 4.9.2.
KX-TVM200E / KX-TVM200NE 4.10. PC CONNECTION A PC connected to the VPS can be used to program various VPS settings. 4.10.1. USB Connection An on-site PC can be connected to the VPS via USB. 4.10.2. LAN CONNECTION An on-site PC can be connected to the VPS over a local area network (LAN).
Page 21
KX-TVM200E / KX-TVM200NE 4.10.3. Modem Connection To connect an off-site PC to the VPS remotely via modem, an optional Modem Card must be installed in the VPS and the off-site PC must also be equipped with a modem. Note • • • • To avoid dedicating a trunk to the internal modem, you can connect the modem to the PBX as you would a standard single line telephone (SLT).
KX-TVM200E / KX-TVM200NE 4.13. SYSTEM COMPONETS Run Indicator Lights during normal operation; flashes when the system is off-line and cannot receive calls. Alarm Indicator Flashes when a system error is detected or while the VPS is preparing to shutdown. Lights when the shutdown procedure is complete.shutdown procedure is complete.shutdown procedure is complete.
Page 26
KX-TVM200E / KX-TVM200NE *1 If the selected language has no prompts, no prompts will be heard. Switch Position Operation Note When setting the Mode Switch to any position (except 0): 1. Disconnect the station wire(s) and wait a few minutes.
KX-TVM200E / KX-TVM200NE Earth Terminal Must be connected to a earth source with less than 1 resistance. DC IN Used to supply power to the VPS from the AC Adaptor. Power Switch Starts the system and begins the self-test. SAFETY PRECAUTION: When making any connections or removing the cover, be sure thepower switch is switched off.
Page 28
KX-TVM200E / KX-TVM200NE Hard Disk Drive Usage Environment Operating Temperature: 5°C to 40°C Operating Humidity: See the graph below. Shock: Under 5G Vibration: 5 Hz to 22Hz: 0.0042 cm displacement; double amplitude, 1 octave per minute. 23 Hz 350 Hz: Under 0.5G Magnetic Field: DC: 0.6mT...
KX-TVM200E / KX-TVM200NE 5 DISASSEMBLY INSTRUCTIONS 5.1. HOW TO REMOVE THE CABLE COVER Opening the Covers 1. Push the release button in the direction shown below (1), and slide the cable cover in the direction shown below (2). Turn the cable cover away from the unit and remove it.
KX-TVM200E / KX-TVM200NE Removing the Front Cover While holding the front cover open at a 45 angle, life the cover away from the unit as shown. 5.3. HOW TO REMOVE THE HARD DISK DRIVE UNIT AND PCB1 1. Remove the four Screws (D).
Page 31
KX-TVM200E / KX-TVM200NE 3. Remove the nine Screws (A). 4. Remove the one Screws (B). 5. Remove the PCB1.
KX-TVM200E / KX-TVM200NE 6.1. MAIN BOARD On the main board are: the system control components consisting of the CPU, ROM, RAM, ASIC; external interfaces such as LAN, USB, and HDD interfaces; modem and slot card optional interfaces; and power supply control unit.
Page 34
KX-TVM200E / KX-TVM200NE 6.1.1. Control Block (CPU) The CPU is a Hitachi SH7706. Based on the SH-3 CPU core using Hitachi´s SuperH architecture, the SH7706 is a RISC microprocessor integrating peripheral functions required for system configuration. High-speed DMA and Bus State Controllers (BSC) are imbedded for direct connectivity with various memory types.
Page 36
KX-TVM200E / KX-TVM200NE 6.1.2. Control Block (ROM) The ROM is 8Mbit NOR Flash ROM x 1. The system implements a bootstrap program in ROM whereby programs necessary for system operation are loaded into ROM from the HDD on startup. 6.1.3.
Page 37
KX-TVM200E / KX-TVM200NE 6.1.4. Control Block (ASIC) The system uses an ASIC called iVDC (Intelligent Voice & Peripheral Device Controller), which comprises the voice processing engine of the PCC voice mail system, run in combination with an SH microprocessor and TI DSPs. This ASIC allows the sending and receiving of 24 channels of audio serial data with 12 DSPs and enables data exchange with the HDD through buffer memory.
Page 38
KX-TVM200E / KX-TVM200NE SH-CPU interface terminal (interrupt terminal) N_IVDC_INT input "L"Act Interrupt signal (iVDC) N_VB_INT input "L"Act Interrupt signal (VB) N_CDHDL_INT input "L"Act Interrupt signal (DSP) N_WE input "L"Act Interrupt signal (Cch, HDLC) External device control terminal (general-purpose port) GPIO6 - GPIO1...
Page 39
KX-TVM200E / KX-TVM200NE TEST1 input User test signal. Used when testing SIC chip. "L"=normal operation. "H"= test mode.Test mode has the following actions. • • • • The input clock frequency is treated as 32MHz. Normally, 64MHz is input to the SYSCLK terminal and clock inputs are provided by dividing by 2 for 32MHz internal clocks and 4 for 16MHz internal clocks.
Page 41
KX-TVM200E / KX-TVM200NE 6.1.5. Voice Buffer SRAM The SRAM used is 8Mbit x 1. This system uses SRAM as the relay buffer for voice data between the DSPs and HDD. The voice buffer has memory area for four seconds per channel on both A and B sides, giving a total of 24 channels x 4sec (A) x 4sec...
Page 42
KX-TVM200E / KX-TVM200NE 6.1.6. The LAN consists of the SMSC´s 91C113 Ethernet driver IC and a SpeedTech P52-P14-31A9 connector with a built-in transformer. This IC driver provides 10/100base-T Ethernet integrating MAC and PHY in one chip.
Page 43
KX-TVM200E / KX-TVM200NE Network Interface Fully integrated IEEE 802.3/802.3u-100Base-TX/10Base-T Physical Layer Auto Negotiation: 10/100,Full / Half Duplex LAN Interface Connector 6.1.7. The USB employs the Mitsubishi M66591. In accordance with the USB (Universal Serial Bus) standard Rev 2.0, the M66591 is a USB peripheral controller that supports both Hi-speed and Full-speed transfer modes.
Page 45
KX-TVM200E / KX-TVM200NE 6.1.8. Local Bus Gate Synchronous and asynchronous buses coexist on the main board of this system. Because a synchronous bus is affected by the signal line load capacitance and load capacitance due to the pattern of the host, in this system the synchronous bus connects directly with the CPU acting as the primary bus, and in order to minimize the load capacitance, the board is designed taking pattern and run lengths into consideration.
Page 47
KX-TVM200E / KX-TVM200NE 6.1.9. Slot Interface Circuit This Slot Interface Circuit is dedicated for a 4-port Digital Interface Card (KX-TVA204/TVM204X). It consists of a DSP, ECO chip control 8 bit control bus, 8M serial bus McBSP1 for sending/receiving voice data, the serial bus for DPT signal control, various control signals, the card power supplies, and the identification signal of each card.
Page 48
KX-TVM200E / KX-TVM200NE 6.1.10. HDD Interface Circuit This HDD Interface Circuit is a 40 pin ATA interface for 3.5" HDD. ATA mode 4-ready IORDY is supported. Multiword DMA transfer is also available. Ultra DMA is not supported. This system operates in PIO transfer mode.
Page 49
KX-TVM200E / KX-TVM200NE 6.1.11. Modem Option interface slot For remote maintenance, the board provides a slot for a modem card. Serial send/receive signal for sending/receiving data with modem IC, 3.3v power supply, and reset signal capable of separately resetting only the modem are reserved.
Page 50
KX-TVM200E / KX-TVM200NE 6.1.12. DC-DC Converter Circuit This system has external AC adaptor, and DC40V is supplied by an external AC adaptor to the system. AC Adaptor specification AC input (Primary) 100 V AC to 240 V AC, 1.5A, 50 Hz/60 Hz DC output (Secondary) DC40 V, 1.38 A (55.2 W)
Page 51
KX-TVM200E / KX-TVM200NE About jumper J108 for the lithium battery J108 is a jumper switch to supply the lithium battery voltage to the main board. Please note that the power supply of the real- time clock is stopped and the time setting of the system is reset to its initial state when this jumper switch is turned off. In this case, a red alarm LED in the front panel lights up by the battery back alarm, displaying the state.
KX-TVM200E / KX-TVM200NE 6.2. VOICE DATA PATH SWITCHING BASED ON DIFFERENCE IN INTERFACE 6.2.1. During DPT interface When DPT interface is selected, each DPT and each DSP are connected as pairs. Each McBSP0 highway between each pair is a path independent from the highways of other channels. The clock master is the ECO ASIC making up the DPT interface.
Page 53
KX-TVM200E / KX-TVM200NE 6.2.2. During VM-Link interface When a connection is made with the VM-Link interface, the VM-Link interface signal is first received by the ASIC (iVDC) and separated into voice data and Dch control data. The voice data is transmitted to the voice highway McBSP0 common to all...
KX-TVM200E / KX-TVM200NE 7 UTILITY The Utility menu provides access to the following functions and utilities: - Quick Setup - System Back Up - System Prompts Customisation - Line Status - System Trace - System Maintenance - System Initialise/Restart - Diagnostic...
When you click Next on the PBX Environment screen, Auto Configuration dialogue box appears. Click OK to start Auto configuration, or Cancel to skip Auto Configuration and go to the next setting screen. Auto Configuration is available only in Interactive Mode and with Panasonic KX-T series PBXs using APT/DPT integration.
KX-TVM200E / KX-TVM200NE 7.2. UTILITY-SYSTEM BACK UP The following system programming data, system parameters, and voice data can be backed up or restored as individual files. The Schedule Backup utility can be used to create backup as scheduled. The Backup History utility can be used to view a record of previous backups.
Page 57
KX-TVM200E / KX-TVM200NE Follow the steps below to use the System Back Up utility: [Creation of Backup] 1. Click Utility in the menu bar. 2. Select System Back Up and Make Backup?. (You can click the icon in the tool bar instead of step 1 and 2.) 3.
Page 58
KX-TVM200E / KX-TVM200NE [Backup History] 1. Click Utility in the menu bar. 2. Select System Back Up and Backup History. (You can click the icon in the tool bar instead of step 1 and 2.) The following status of backup history can be checked in the Backup History dialogue box:...
KX-TVM200E / KX-TVM200NE 7.3. UTILITY-SYSTEM PROMPTS CUSTMISATION The System Prompts Customisation screen is used to view, play, add, edit, or delete system prompts. The System Administrator can also check the prompt number and text for these prompts. The following categories of system prompts can...
KX-TVM200E / KX-TVM200NE 7.4. UTILITY-LINE STATUS The System Administrator can confirm the condition of each port and turn on/off VPS Call Progression Mode. Follow the steps below to use the Line Status utility: 1. Click Utility in the menu bar.
KX-TVM200E / KX-TVM200NE 7.5. UTILITY-SYSTEM TRACE The System Administrator can monitor VPS activities and log the activities into a separate file. The following data can be logged for each port or all ports: - DTMF/Dial: DTMF signals sent and received by the VPS.
KX-TVM200E / KX-TVM200NE 7.7. UTILITY-SYSTEM INITIALIZE/RESTART The System Initialise/Restart is used to restart the VPS. There are 2 methods as follows: a) Initialise System: clears all voice data except the installed system guidance, and returns all system parameters to their default settings.
KX-TVM200E / KX-TVM200NE 7.8. UTILITY-DIAGNOSTIC Diagnostic is used to diagnose the following hardware of VPS. - Codec/DSP Voice Path: diagnoses whether the voice path between Codec and DSP functions properly. - Play/Record Voice Path: diagnoses whether the voice path in the playing/recording unit functions properly.
KX-TVM200E / KX-TVM200NE 7.12. UTILITY-LAN SETTING The System Administrator can set the IP address and Port Number for the VPS. After you changed the Port Number or Default Gateway, you need to restart the VPS. Follow the steps below for LAN Settings: 1.
KX-TVM200E / KX-TVM200NE 7.14. UTILITY-SET LANGUAGE Allows you to change the display language of KX-TVM Maintenance Console. Note: • • • • In order to use this feature, you need to upgrade the KX-TVM Maintenance Console software on a PC connected to the VPS.
KX-TVM200E / KX-TVM200NE 8.4. USB INTERFACE IS OUT OF ORDER * Please confirm the USB cable and the USB driver software when you can not connect USB. 8.5. LAN INTERFACE IS OUT OF ORDER * Please confirm LAN cable, HUB, and IP address when you can not connect LAN.
KX-TVM200E / KX-TVM200NE 10 HOW TO REPLACE A FLAT PACKAGE IC Even if you do not have the special tools (for example, a spot heater) to remove the Flat IC, with some solder (large amount), a soldering iron and a cutter knife, you can easily remove the ICs that have more than 100 pins.
KX-TVM200E / KX-TVM200NE 14 REPLACEMENT PARTS LIST (KX-TVM200E/KX- TVM200NE Note: Ref. Part No. Part Name & Description Remarks 1. RTL (Retention Time Limited) PSHR1284Z HOLDER PC+ABS< The marking (RTL) indicates that the Retention Time is (UL94- limited for this item.
KX-TVM200E / KX-TVM200NE 14.3. MAIN BOARD PARTS Ref. Part No. Part Name & Description Remarks D106 B0JCNG000006 DIODE(SI) Ref. Part No. Part Name & Description Remarks D107 MAZ83000ML DIODE(SI) D108 MA8051 DIODE(SI) PCB1 PSLP1280Z MAIN BOARD ASS´Y (RTL) D109 MA8075...
Page 79
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks RA139 D1H81034A024 RESISTOR ARRAY, 10K RA220 D1H83304A024 RESISTOR ARRAY, 33 RA140 D1H81034A024 RESISTOR ARRAY, 10K RA221 D1H83304A024 RESISTOR ARRAY, 33 RA141...
Page 80
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks FIL126 J0HAAH000003 IC FILTER ECUE1C103KBQ 0.01 FIL127 J0HAAH000003 IC FILTER ECUE1C103KBQ 0.01 FIL128 J0HAAH000003 IC FILTER ECUE1C103KBQ 0.01 FIL129 J0HAAH000003 IC FILTER ECUE1C103KBQ 0.01...
Page 81
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C162 F1H1A1050029 C266 PQCUV1A225ZF C163 ECUV1C104ZFV C267 EEEHB1A221P C164 PQCUV1A225ZF C270 EEEHB1A221P C165 PQCUV1A225ZF C273 ECUV1H103KBV 0.01 C166 PQCUV1A225ZF C275 ECUV1A105ZFV...
Page 82
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C353 ECUE1C103KBQ 0.01 C426 ECUE1H221JCQ 220P C354 ECUE1H221JCQ 220P C427 ECUE1C103KBQ 0.01 C355 ECUE1C103KBQ 0.01 C428 ECUE1C103KBQ 0.01 C356 ECUE1C103KBQ 0.01...
Page 83
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C563 ECA1AHG471 470P C651 ECUE1C103KBQ 0.01 C565 ECUV1A105ZFV C652 ECUE1C103KBQ 0.01 C566 ECUV1A105ZFV C653 ECUE1C103KBQ 0.01 C567 ECUV1H103KBV 0.01 C654 ECUV1E104ZFV...
Page 84
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks L161 ERJ3GEY0R00 R148 ERJ3GEYJ330 L162 ERJ3GEY0R00 R149 ERJ3GEYJ330 L163 ERJ3GEY0R00 R150 ERJ3GEYJ330 L164 ERJ3GEY0R00 R151 ERJ3GEYJ330 L165 ERJ3GEY0R00 R152 ERJ3GEYJ330 L166...
Page 85
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R296 ERJ3GEYJ470 R437 ERJ3GEYJ330 R297 ERJ3GEYJ100 R438 ERJ3GEYJ330 R298 ERJ3GEYJ100 R439 ERJ3GEYJ330 R299 ERJ3GEYJ470 R440 ERJ3GEYJ330 R300 ERJ3GEYJ100 R441 ERJ3GEY0R00 R301...
Page 86
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R599 ERJ3GEYJ330 R687 ERJ3GEY0R00 R600 ERJ3GEYJ330 R690 ERJ3GEY0R00 R601 ERJ3GEYJ330 R691 ERJ3GEYJ151 R602 ERJ3GEYJ330 R692 ERJ3GEY0R00 R603 ERJ3GEYJ330 R694 ERJ3GEY0R00 R604...
KX-TVM200E / KX-TVM200NE 16.5. LED CN101 Green 3.0 x1.5 1 RUN LED101 2 GND LED102 3 ALM Red 3.0 x 1.5 KX-TVM200E/KX-TVM200NE LED 16.6. VM LINK +3.3V CN900 LDHW1 LDHW[1] SHWFH SHW_FH SHW_CLK SHWCLK IC900 LUHW[1] LUHW1 1 DI1 SHW_CLK...
KX-TVM200E / KX-TVM200NE 18.1. 4-PORT DIGITAL EXPANSION CARD (KX-TVM204X) Each KX-TVM204 adds 4 ports to the VPS which can be used for DPT Integration. KX-TVM204 cards can be installed in slots 1 to 6 of the VPS. Integration Type Basic Configuration...
Page 117
KX-TVM200E / KX-TVM200NE Installing Cards in Slot 5 or Slot 6 When installing a card in Slot 5 or 6, secure the cars using the screws included with the card, instead of the extension bolts. Note • • • • The KX-TVM204 operates at SELV.
KX-TVM200E / KX-TVM200NE 18.2. SPECIFICATIONS OF THE 4-PORT DIGITAL EXPANSION CARD (KX- TVM204X) BLOCK SPECIFICATIONS MAP No. DESCRIPTIONS TI TMS320VC5409-80 IC811 80Mips DSP Digital signal processor IC817 frequency: 8.000MHz Core frequency: 80.00MHz The function for two ports is included in one tip.
Page 120
KX-TVM200E / KX-TVM200NE 18.3.2. DSP and DPT Block Diagram McBSP0 sends and receives voice PCM data to and from the PBX interface. The PBX interface has three types of interfaces. For this reason, each interface has a different device to and from which PCM voice data are sent and received. In any case, the DSP´s McBSP0 is a clock slave while the clock master varies from interface to interface.
Page 121
KX-TVM200E / KX-TVM200NE • • • • McBSP0 McBSP0 is used at the serial communication port for sending/receiving voice data between the CODEC and the DSP, and between the PBX interface and the DSP. As for the data to be handled, only 2-channel 8-bit MSB First voice data are sent and received. The frame pulse remains active during valid data are asserted according to the specifications of the PBX interface ASIC.
Page 122
KX-TVM200E / KX-TVM200NE • • • • McBSP1 McBSP1 is connected with the serial management controller interface of VM-dedicated ASIC. This interface sends and receives the voice data and control commands of each channel with up to 12 DSPs (24 channels) at the maximum.
Page 123
KX-TVM200E / KX-TVM200NE • • • • McBSP2 For this DSP, McBSP2 is unassigned and used as general-purpose I/O. Depending on the slots installed, the DSP must recognize which channel it now falls under. Therefore, the serial communication function of McBSP2 is disabled, and DR, CLKS, FSR and CLKR are used as general-purpose input ports to discriminate 12 types of channels with these four bits.
Page 124
KX-TVM200E / KX-TVM200NE the same time, an HPI interrupt signal notification is sent to the host CPU from the ASIC. The CPU which received the notification of the HPI interrupt signal immediately reads the appropriate channel of the HPI interrupt register in the ASIC, clears the register, and at the same time performs access to the DSP that sent the interrupt.
Page 128
KX-TVM200E / KX-TVM200NE 18.3.3. ECO This ASIC dedicated to DPT interface communication is the PCC digital PBX extension interface. • • • • PBX Interface Related output/input signal: PDR (PDR0, PDR1 ), PVRH, PVRL, PDX0, PDX1...
Page 129
KX-TVM200E / KX-TVM200NE DDR (DDR0, DDR1), DVRH, DVRL, DDX0, DDX1 Related register name: P_RST, PBXMD, PBXIF, D_RST, DPTMD, DPTIF With a 512Kbps ping-pong transmission (AMI encoding) interface, a transmission band of 2B (64kbps x 2) + D (16Kbps) +C (8Kbps) is ensured. It also has the following functions: clock extraction through digital PLL, synchronization switching, DPT interface, transmitted pulse width programmability, and receiving edge position programmability.
KX-TVM200E / KX-TVM200NE 18.7. REPLACEMENT PARTS LIST Ref. Part No. Part Name & Description Remarks (KX-TVM204X) XYN3+F10 SCREW WITH WASHER XZB05X08A03 PROTECTION COVER Note: PSPD1243Z CUSHION PSZKTVM204X GIFT BOX 1. RTL (Retention Time Limited) The marking (RTL) indicates that the Retention Time is 18.7.3.
Page 136
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks RA842 D1H82204A024 RESISTOR ARRAY, 22 C850 ECUV1C104ZFV RA843 D1H82204A024 RESISTOR ARRAY, 22 C851 ECUV1C104ZFV RA846 D1H81034A024 RESISTOR ARRAY, 10K C852 ECUV1C104ZFV...
Page 137
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C924 PSCSZ1AX106M R881 ERJ3GEYJ472 4.7K C925 F4D25704A002 R882 ERJ3GEYJ103 (RESISTORS) R883 ERJ3GEYJ103 L802 PQ4R10XJ000 R884 ERJ3GEYJ560 L803 PQ4R10XJ000 R886 ERJ3GEY0R00 L804...
Page 138
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R960 ERJ3GEYJ470 ZNR71B ERZC07DK820 VARISTOR R961 ERJ3GEYJ103 ZNR72A ERZC07DK820 VARISTOR R962 ERJ3GEYJ103 ZNR72B ERZC07DK820 VARISTOR R963 ERJ3GEYJ680 (CAPACITORS) R964 ERJ3GEYJ680 C701...
Page 139
KX-TVM200E / KX-TVM200NE Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C773 ECUV1E104ZFV R754B ERJ3GEYJ100 C774 ECUV1E104ZFV R755A ERJ3GEYJ100 C775 ECUV1E104ZFV R755B ERJ3GEYJ100 C776 ECUV1E104ZFV R756A ERJ3GEYJ100 (RESISTORS) R756B ERJ3GEYJ100 JP701 ERJWYJ000...
KX-TVM200E / KX-TVM200NE 18.9. FOR THE SCHEMATIC DIAGRAM Note: 1. DC voltage measurements are taken with an oscilloscope or a tester with a ground. 2. The schematic diagrams and circuit board may be modified at any time with the development of new technology.
KX-TVM200E / KX-TVM200NE 19.1. MODEM CARD (KX-TVM296NE) The KX-TVM296 allows the VPS to be accessed remotely for administration purposes. Included Items Screw x 1 Installation 1. Insert the card detween the guide rails and slide it down as shown. CAUTION When installing optional cards, do not put pressure on the main board.
KX-TVM200E / KX-TVM200NE 19.2. SPECIFICATIONS OF THE REMOTE MODEM CARD (KX-TVM296NE) On this system is mounted a remote modem card as an option for the purpose of remote maintenance. The interface with the main card is a simple two-wire serial interface connection.
KX-TVM200E / KX-TVM200NE 19.6. REPLACEMENT PARTS LIST 19.6.2. ACCESSORIES AND PACKING (KX-TVM296NE) MATERIALS Note: Ref. Part No. Part Name & Description Remarks 1. RTL (Retention Time Limited) XYN3+F8 SCREW WITH WASHER The marking (RTL) indicates that the Retention Time is...