Getting Started
Power On
CAUTION
Login
1-24
Press the Power On/Off switch to turn the power on. The
circuit breaker must also be in the on position. For circuit
breaker location, see 'Circuit breaker' on page 1-27 for more
information.
Personal IDs and associated passwords can be preset on the
LOGIQ E9.
If the User Auto Logon preset is blank, you are prompted to
login.
Figure 1-13. Operator Login Window
1. Operator: Select the Operator.
2. Password: Enter Operator's password (optional).
3. Select type of Logon or Cancel.
•
Emergency: Data stored only for the duration of the
current examination.
•
OK: Standard logon
•
Cancel: Cancel logon
System Start-Up
LOGIQ E9
Direction 5454884-100 English Rev. 1
–
User Guide