Kenwood TH-F6A Service Manual page 61

ATT Attenuator
Description:
Gets or sets the attenuator.
Function:
Use to attenuate nearby or extremely strong signals to prevent erroneously control and
overload. The attenuator is approximately 20 DB when ON.
Send:
Status: ATT
Modify: ATT [val]
Return:
ATT [val]
Where:
[val] see Logic Table
Notes:
Example:
Sent: ATT
Return: ATT 1
Sent: ATT 0
Return: ATT 0
Requesting status of attenuator.
Transceiver says that attenuator is on.
Requesting attenuator is off.
Confirming that attenuator is off.
Menu Item #
n/a
60