Filling The Water Container - Miele CVA 6805 Operating And Installation Instructions

Filling the water container


Change the water every day to
prevent a build-up of bacteria.
If the coffee machine is plumbed into
the mains drinking water supply, the
water container will fill automatically as
soon as the machine is switched on.
The inlet device in the lid ensures that
the water is taken in slowly.
If the coffee machine has not been
used to make any drinks for a long
time there will be water left in the
inlet hose.
This can impair the taste of the
coffee.
Discard the first full container of
water.
You can also fill the container manually
if you are not using the plumbed in
water supply (see "Settings - Mains
water connection")
If filling the water container manually:
Only use fresh, cold tap water.
Hot or warm water or other liquids
can damage the coffee machine.
Do not use mineral water. Mineral
water will cause serious limescale
deposits to build up in your machine
and damage it.
28
 Open the front of the coffee machine.
 Pull the water container forwards to
remove it.
 Take off the lid and fill the water
container with fresh, cold tap water
up to the "max." mark.
 Push the water container into the
machine until it clicks into place.
If the water container protrudes
slighlty or is a little high, check
whether the surface that the water
container sits on is dirty. If the water
container is not positioned correctly,
the outlet valve will not connect
properly and could leak. Clean the
surface, if necessary.