Page 1
Operating Instructions Digital Wireless Stereo Headphones RP-HF410B Model No. Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. TQBM0367...
Safety precautions ∫ Unit • Avoid using or placing this unit near sources of heat. • Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites. •...
® About Bluetooth Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ∫ Frequency band used This unit uses the 2.4 GHz frequency band. ∫ Certification of this unit • This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary.
Table of contents Safety precautions ............................2 ® About Bluetooth ............................3 Before use Accessories ..............................5 Maintenance..............................5 • Folding this unit ............................ 5 Part names..............................6 Preparation Charging..............................7 Turning the power on/off ..........................7 ® Connecting a Bluetooth device........................
Before use Expressions used in this document • Pages to be referred to are indicated as “ ±±”. • The product illustrations may differ from the actual product. Accessories Please check and identify the supplied accessories. 1 x USB charging cord Maintenance Clean this unit with a dry and soft cloth.
Before use Part names Right (R) side *1*2 LED indicator light [i (9)] button [Í/I ( )] button [1/;/ ] button Charging terminal (DC IN) [j (:)] button • Connect the USB charging cord (supplied) to this Ear pads terminal when charging. ( Raised dot indicating the left side Microphone *1 Hereafter referred to as “LED”...
Preparation Charging The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connect this unit to a computer using the USB charging cord. A : LED B : USB charging cord (supplied) •...
Select “RP-HF410B” from the Bluetooth device’s menu. • A MAC address (an alphanumeric character string that is displayed by and unique to the device) may be displayed before “RP-HF410B” is Bluetooth displayed. • If prompted for a passkey, input the passkey “0000 (four zeros)” of this Bluetooth unit.
Preparation ® Connecting a paired Bluetooth device Turn on this unit. • Press and hold [Í/I ( )] of this unit for approx. 3 seconds until the LED (blue) blinks. • A beep will sound, and the LED (blue) will blink slowly. ®...
Operation Listening to music ® ® If the Bluetooth compatible device supports the “A2DP” and “AVRCP” Bluetooth profiles, music can be played back with remote control operations on the unit. • A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit. •...
Operation Making a phone call ® ® With Bluetooth enabled phones (cell phones or smartphones) that support the “HSP” or “HFP” Bluetooth profile, you can use the unit for phone calls. • HSP (Headset Profile): This profile can be used to receive monaural sounds and establish two-way communication using the microphone on the unit.
Operation Useful functions Activating voice functions You can activate Siri or other voice functions with a button on the unit. ® ® Connect the Bluetooth device and the unit. ( 8, “Connecting a Bluetooth device”) Press and hold [1/;/ ] of this unit for approx. 3 seconds. ®...
• The default settings will be restored after the LED (blue) blinks fast and the unit turns off. ∫ Attention ® • When pairing a device again, delete the registering information (Device: “RP-HF410B”) from the Bluetooth device’s ® menu, and register this unit with the Bluetooth device again.
Other Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions. Sound and audio volume No sound. ®...
Other General The unit does not respond. [Í • This unit can be reset when all operations are rejected. To reset the unit, press and hold /I ( )] for 10 seconds or more. ( Power supply and charging Cannot charge the unit. •...
Other Specifications ∫ General Power supply DC 5 V, 330 mA (Internal battery: 3.7 V (Li-polymer 430 mAh)) Operating time Approx. 24 hours Charging time (25 oC) Approx. 2.5 hours Charging temperature range 10 oC to 35 oC Operating temperature range 0 oC to 40 oC Operating humidity range 35 %RH to 80 %RH (no condensation)
Other To remove the battery when disposing of this unit The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled. • When disposing of this unit, take out the battery installed in this unit and recycle it. •...