Changing The Door Hinging - Miele F 12016 S-2 Operating And Installation Instructions

The appliance is supplied right-hand
hinged. If left-hand hinging is required,
the hinges must be changed.
 Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.

Be careful not to damage the
door seal. If the door seal is dam-
aged, the appliance door may not
close properly and cooling will be in-
sufficient.
 Close the appliance door.
 Unscrew the bottom hinge
bracket , and take it off.
 Take the appliance door off.
 Pull hinge pin  out of hinge
bracket , and screw it into the
second hole in the hinge bracket.

Changing the door hinging

(The hinge pin can be removed and
screwed back in using the hexagon
key supplied.)
 Remove cover  and use it to cover
the empty holes on the opposite side.
 Unscrew the upper hinge pin  with
the hexagon key supplied and refit it
on the opposite side.
 Don't forget to use the washer!
49