Panasonic WJ-ND300 Maintenance Manual page 4

WJ-ND300 SATA conversion guide (single)
Important +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The HDDs should be installed in the correct positions in the
order as shown right. Do not skip a drive position or reverse the
order of the HDD positions. Incorrectly placed drives will result
in the recorder not recognizing the extension unit or the drives.
HDD #1 slot : HDD1
HDD #3 slot : HDD3
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(4) Remove 11 screws that fix the top cover to the main unit,
and then remove the top cover.
(5) Remove eight screws fixing the HDD unit, pull out the
unit.
(6) Remove the screws (four pieces each) fixing the HDDs,
the sleeves and dampers and then remove the HDDs.
Panasonic
HDD #2 slot : HDD2
HDD #4 slot : HDD4
Top cover
4
ND300_SATAConversionGuideS_A
Maintenance guide
Inside the front cover
HDD 2 HDD 4
HDD 1 HDD 3
HDD unit
Sleeve
Damper