6. The EPSON TWAIN Pro Network setup dialog box appears.
Enter the IP address or Host name of the scanner server PC in
the Network Scanner Address box.
Note:
For details on specifying the IP address, see "Setting the
Scanner Server PC's IP Address" on page 3-36.
A host name can be used on networks that use the DNS naming
service.
If you need to change any settings in the EPSON TWAIN Pro
Network setup dialog box after setup is complete, select EPSON
TWAIN Pro NET in the Apple Menu Control Panels.
7. Specify a Timeout Setting between 30 and 300 seconds.
Normally you do not need to change this value.
Installing the Software
3
3-43