Advertisement
Quick Links
ntrusion
Started | G450 Home Control Gateway
Getting Started
This Home Control Gateway is a controller that supports home automation devices within a Home
Control ecosystem. Home automation devices are added to the network, and provide users simple home
control from mobile devices (smart phones, tablets) and web browsers. The gateway additionally
communicates with, and controls, Bosch alarm panels using the Ethernet port connection.
Activation Process
The following sequence of events must take place prior to the activation and daily use of the Home
Control Gateway. Refer to the list below for task assignments and ownership.
1. Dealer: The Dealer must register for services at:
https://installerservices.boschsecurity.com
2. Bosch: The Bosch representative creates an Administrative Portal (AP) account and unlocks
the dealer's account (this enables the dealer to order the controller). An AP account email
notification is sent to the dealer.
3. Dealer: The Dealer orders the Home Control Gateway. The Dealer registers the controller
and activates the service in Administrative Portal upon arrival of the controller.
4. Dealer: The Dealer installs and configures the controller and enables a Bosch Alarm Panel to
communicate with the controller.
5. End-User: The End-User customizes and uses the Home Control ecosystem. Additional
device may be added at this time.
G450 Overview
The following descriptions refer to the buttons and LEDs on your gateway. Although these buttons are
not the primary method for adding or removing devices, please familiarize yourself with the Home Control
Gateway.
Refer to the figure below for a system overview.
are Trademarks of Robert Bosch GmbH, Germany
are Trademarks of Robert Bosch GmbH, Germany
| Getting
Advertisement
Related Manuals for Bosch G100
Summary of Contents for Bosch G100
- Page 1 3. Dealer: The Dealer orders the Home Control Gateway. The Dealer registers the controller and activates the service in Administrative Portal upon arrival of the controller. 4. Dealer: The Dealer installs and configures the controller and enables a Bosch Alarm Panel to communicate with the controller.
-
Page 2: Log In To Your Account
Logging in: Go to http://bosch.mios.com. The login page opens. From your welcome email, insert your credentials (Username and Password) and click Login. Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3... - Page 3 The dashboard appears. The dashboard is your control center for the Home Control Gateway. The appearance of your dashboard may vary slightly from the one below, depending on the devices you install. Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3...
- Page 4 Place the device within 30 feet of the Home Control Gateway. Go to “Devices” and click “Add Device” to start the wizard. Click on the appropriate device category (plus symbol). Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3...
- Page 5 Gateway. For example, a light switch that is already installed on a wall in another room, or a door lock. For these situations, the Gateway includes a battery pack (G100 only) that allows you to disconnect the Gateway from the power cable and bring it to the installed device. This step is optional, but if you do...
- Page 6 5 seconds until all LEDs go off to save your changes. The Gateway exits the inclusion mode and turns off the battery mode. Notice G100 only: If you want to exclude a device, follow the above mentioned steps, but press the button instead of the button.
- Page 7 Launch the application and log in using the same credentials used when accessing the web browser dashboard. Depending on the operating system of your smart phone, you might see one of the following screens. Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3...
- Page 8 Select Devices to view and control your devices. Select Scenes to create or modify scenes using your mobile app. Follow the instructions on the screen. Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3...
- Page 9 Proper planning and coordination are essential when utilizing the capabilities of the gateway in conjunction with your Bosch Security System. Understanding your current environment gives you a clearer picture as to how you want to automate your living space, and how you might improve it through the use of home control functionality.
- Page 10 The Gateway can also turn on lights when motion is detected, so there's no more fumbling for the bathroom light or dangerous stairwell lights in the middle of the night. Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3...
- Page 11 Possibilities are endless within the home control spectrum when using the Home Control Gateway! Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3...