Figure 27. PCIe riser-cage assembly removal
Step 3.
Grasp the adapter by its edges and carefully pull it out of the PCIe riser-cage.
Figure 28. Adapter removal
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove an Internal Faceplate Transition (IFT) adapter
Use this information to remove an IFT adapter.
Before you remove an IFT adapter:
1. Read the following section(s) to ensure that you work safely.
• "Installation Guidelines" on page 30
2. Turn off the corresponding DWC tray that you are going to perform the task on.
42
ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Setup Guide