Technical Data; Ec Declaration Of Conformity - Husqvarna DS150 Operator's Manual

Dimensions
Height, mm/inches
Width, mm/inches
Depth, mm/inches
Weight, kg/lb
Travel length, mm/inch
Max. drill diameter, mm/inches
The column's angling
Maximum load, kg/Ib

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the stands
Husqvarna DS150, DS250, DS250 Single speed and DS250 Single speed short from 2014's serial numbers and
onwards (the year is clearly stated in plain text on the type plate with subsequent serial number) are in conformity with
the requirements of the COUNCIL'S DIRECTIVES:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
The following standards have been applied:
SS-EN12348+A1:2009
Gothenburg 13 January 2014
Helena Grubb
Vice President, Construction Equipment Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)

TECHNICAL DATA

DS150 DS250
862/33,9 1052/41,4
266/10,5 266/10,5
522/20,6 545/21,5
14/30,9 17/37,5
495/19,5 686/27
150/6 250/10
0-60° 0-60°
50/110 50/110
DS250 Single speed DS250 Single speed short
1052/41,4
266/10,5
545/21,5
16/35,3
686/27
150/6 (collar)
250/10 (quick
mounting)
0-60°
50/110
862/33,9
266/10,5
545/21,5
15/38
495/19,5
250/10
0-60°
50/110
English – 15