Configure a G-240W-G indoor ONT
Table 57
2
3
7.3.4
G-240W-G ONTs also support maintenance tasks, including:
•
•
•
Procedure 59
A password must adhere to the password rules, which are as follows:
When the password meets the password rules, the application displays the message "Your
password has been changed successfully".
158
Release 05.08.01a | August 2018 | Edition 01
Device Information parameters
Field
Description
Device Name
Name on the ONT
Vendor
Name of the vendor
Serial Number
Serial number of the ONT
Hardware version
Hardware version of the ONT
Boot version
Boot version of the ONT
Software version
Software version of the ONT
Chipset
Chipset of the ONT
Device Running Time
Amount of time the device has run since
last reset in hours, minutes, and seconds
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Maintenance
password change
LOID configuration
SLID configuration
Password configuration
•
the password may consist of uppercase letters, lowercase letters, digital numbers, and
the following special characters ! # + , - / @ _ : = ]
•
the password length must be from 8 to 24 characters
•
the first character must be a digital number or a letter
•
the password must contain at least two types of characters: numbers, letters, or special
characters
•
the same character must not appear more than 8 times in a row
3FE-47555-AAAA-TCZZA
7368 ISAM ONT G-240W-G Product Guide
Issue: 01