Makita EG2250A Instructions For Use Manual page 19

- Carbon monoxide poisoning from engine
exhaust.
Operate outside away from open windows or
doors.
- Burns from hot parts.
Let the engine and exhaust system cool before
touching.
- Injury from moving parts.
Do not run the engine unless the instruction tells
you to do so.
Even then, keep your hands, fingers, and clothing away.
When any protective guard or shield has been removed,
do not run the engine.
Loose Parts (Wheel Kit and Handle) and Front Support (Only for model EG4550A,
EG5550A, EG6050A)
Check all loose parts against the following list. Contact your dealer if any of the loose parts shown below are not included
with the generator.
No.
1
2
3
4
5
6
7
8
• To reduce the possibility of a fire or explosion, be
careful when working around gasoline or batteries. Use
only a non-flammable solvent, not gasoline, to clean
parts. Keep all cigarettes, sparks, and flames away
from all fuel-related parts.
Unpacking
1. Take out the generator and the loose parts box from
the carton.
2. Check the loose parts against the contents list below.
Tools required: 12-mm wrench (2), pliers
Name
10-Inch Roller
Wheel Axle
Transport Handle Shaft
M8 x 100 Bolt
Transport Handle
Front Stand
Rubber Base
M8 Flange Nut
Quantity
2
2
2
2
2
2
2
6
19