CAUTION DO NOT EXCEED CONNECTOR/BUS CAPACITY IN THE APPROVED PANEL ASSEMBLY . Figure 1. TMQV Circuit Breaker and Molded Case Switches b. If circuit breaker includes factory installed internal accessories, TMQV circuit breakers (Fig. 1) are rated from 60A to 225A continu -...
Page 3
DEH41188 Installation Instructions Installation Instructions for TMQV Circuit Breakers and Molded Case Switches Effective November 2016 2-6. If required, install terminal shield on circuit breaker cover with mounting screws provided . 2-7 . If required, install an interphase barrier by sliding barrier into dovetail grooves between terminals .
Information provided is subject to change without notice. Please verify all details with GE. All values are design or typical values when measured under laboratory conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained under end-use conditions.