Electrolux Wash Program Allocation - Electrolux EDS Installation Manual

28
A password is needed to continue.
The default password is set to 01234.
When the password is set you will enter the INSTALLER MENU.
Activate the INSTALLER SERVICE menu.
INSTALLER MENU
INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE
Activate the CLEAR DATA LOG menu.
INSTALLER SERVICE
SERVICE PUMPS
VIEW SINK COUNT
VIEW SINK VOLUME
VIEW AMOUNT PUMPED
CLEAR DATA LOG
Before resetting the data log there will be a warning message on the display. Press Enter. Set the current date and
press Enter to reset the data log.
Note!
Resetting the data log will not affect the main program settings.

3.9 Electrolux wash program allocation

Enter the MAIN MENU and activate the INSTALLER MENU.
MAIN MENU
EMERGENCY PUMP STOP
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS
INSTALLER MENU
VIEW EFFICIENCY
A password is needed to continue.
The default password is set to 01234.
When the password is set you will enter the INSTALLER MENU.
Activate the PROGRAM FORMULAS menu.
INSTALLER MENU
INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE
Installation manual