Panasonic CX-400 Series Instructions Manual page 8

Retroreflective types for sensing transparent objects
Item
NPN output
PNP output
Sensing range
Installation range for the
reflector
Object to be sensed
Repeatability
(perpendicular to sensing axis)
Supply voltage
Current consumption
Output
Output operation
Short-circuit
protection
Response time
Automatic interference
prevention function
Protection
Ambient temperature
Ambient humidity
Emitting element
Material
Cable
Net
Gross
*3
Accessory
*1
Model nos. with the suffix -J indicate the M12 pigtailed type. The suffix -Z indicates the M8 connector type. Thru-beam model nos. with the suffix "E" shown
on the label affixed to the sensor is the emitter; "D" is the receiver. The retroreflective type sensor model no. with the suffix "-Y" comes without the RF-230
reflector.
*2
The sensing range and the sensing object for the retroreflective type sensor is specified for the RF-230 reflector. For more detailed information, please refer
to the CX-400 Series User's Manual. After installation, be sure to check operation under actual conditions.
*3
The RF-230 reflector is included with the product. Other reflectors and reflective tape are available for purchase. For more detailed information, please refer
to the CX-400 Series User's Manual.
Ramco National
Short sensing range
*1
CX-481
*1
CX-481-P
*2
50 to 500mm
*2
100 to 500mm
50mm or more for opaque, translucent or transparent object
• NPN or PNP open-collector transistor
• NPN: Maximum sink current: 100mA; PNP: Maximum source current: 100mA
• Applied voltage: 30V DC or less (NPN: between output and 0V; PNP: between output and +V)
• Residual voltage:
NPN: 2V or less (at 100mA sink current), 1V or less (at 16mA sink current)
PNP: 2V or less (at 100mA source current), 1V or less (at 16mA source current)
-25 to +55°C (No dew condensation or icing allowed), Storage: -30 to +70°C
Enclosure: PBT, Lens: Polycarbonate, Indicator cover: Polycarbonate
2
0.2mm 3-core (thru-beam type sensor emitter: 2-core) cabtyre cable, 2m long
www.PanasonicSensors.com
Standard sensing range
*1
CX-483
*1
CX-483-P
*2
50 to 1000mm
*2
100 to 1000mm
0.5mm or less
12 to 24V DC ±10% Ripple P-P 10% or less
10mA or less
NPN or PNP output type
Light-ON or Dark-ON
Incorporated
1ms or less
Incorporated
IP67 (IEC)
35 to 85% RH, Storage: 35 to 85% RH
Infrared LED
Approx. 50g
Approx. 80g
RF-230 (Reflector): 1 pc.
8
Long sensing range
*1
CX-482
*1
CX-482-P
*2
0.1 to 2m
*2
0.8 to 2m
*2
1-800-280-6933