Configuration Using Kpg-89D - Kenwood TK-2180 Modification Information

3. Reinstall the shielding plate, top rubber packing, and
the top case to the transceiver.

2.7.10 Configuration using KPG-89D

1. Run the KPG-89D.
2. Select
"Program" > "Read Data from the Transceiver".
You can also click the
The Read Data from the Transceiver window appears.
3. Click "Read".
The KPG-89D starts reading the configuration data
from the transceiver.
4. Select
"Edit> Extended Function> Option Board Tab".
The Extended Function window appears.
Version: 1.13 USA
icon on the Toolbar.
Modification Information
2 CONNECT OPTIONAL DEVICES
5. Select
"Optional Board" > "VGS-1"
TK-2180/ 3180 Transceivers
TK-7180/ 8180 Transceivers
6. Select
"Edit" > "Optional Features> VGS Tab".
The Optional Features window appears.
Note: An error message appears when you click the VGS-1 tab if
the "VGS-1" is not selected in the Extended Function
window > the Optional Board pulldown menu.
7. Configure the VGS-1 board.
Refer to the "FPRG 7.6 VGS-1 Tab" for details.
8. Select
"Program" > "Write Data to the Transceiver"
You can also click the
The Write Data to the Transceiver window appears.
10. Click "Write".
The configuration data is written to the transceiver.
.
.
icon on the Toolbar.
29