Page 1
Operating Instructions/ 取扱説明書 Video Encoder Board/ ビデオエンコーダーボード AJ-YDX30G Model No. 日 本 語 Before operating this product, please read the instructions carefully and save this manual for future use. このたびは、 “パナソニック製品”をお買い上げいただき、まことにありがとうご ざいました。 取扱説明書をよくお読みの上、正しく安全にお使いください。 保証書は、「お買い上げ日・販売店名」などの記入を確かめ、取扱説明書とともに 大切に保管してください。 SS0211AT1042 -FJ VQT3L98-1 Printed in Japan...
Page 2
ìclipî in these supplied CD-ROM under the LDOC folder operating instructions. (original English text only). For details on acquiring the source code, visit the following website. http://panasonic.biz/sav/ Do not contact Panasonic with questions regarding the content of the acquired source code.
Overview The AJ-YDX30G (hereafter “this board”) is a video encoder board for a memory card camera recorder (hereafter “P2 cam”). If proxy data cannot be recorded even when this board is installed correctly, then firmware update on the main unit may be necessary.
Installation in AJ-HPX3100G CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire or electric shock do not perform any servicing other than as directed in the operating instructions unless you are qualified to do so. Make sure that the power of AJ-HPX3100G Remove five screws (A) and four screws (C: is turned OFF.
Page 6
Insert the INT CONNECT board into the Remove one screw (B), and first remove the original position, and fasten with the screw INT CONNECT board, then remove the (B) at the position removed in step BACKEND board. At this time, be careful not When inserting these boards, do so slowly to touch the side contacts.
Proxy configuration Configuration menu Item/ To record proxy data with the P2 cam, perform Variable Data Remarks range configuration on the <PROXY SETTING> screen storage in the SYSTEM SETTING page of the PROXY DISP Select whether to display a configuration menu. message on the Viewfinder and the LCD monitor when When this board is installed in the P2 cam, the...
Checking settings Checking version information You can confirm the menu values of REC The following versions are displayed on the MEDIA, REC MODE, and TC SUPER on the <DIAGNOSTIC> screen in the MAINTENANCE FUNCTION screen of MODE CHECK by pulling page of the configuration menu.
Recording on SD memory cards To record proxy data, use Panasonic SD Memory Format status is displayed under “SD Cards or SDHC Memory Cards with a class STANDARD” item. specification of class 2 or higher. If “NOT SUPPORTED” is displayed, format the For the latest information not available in the card using the P2 cam.
Page 10
SHQ 2CH MOV 5060 kbps 25 minutes this menu. (Reference values when Panasonic bland SD memory cards or SDHC memory cards are used for continuous recording. Actual recording time depends on the kind of scenes and the number of clips.)
(Excluding Check the proxy data using the P2 viewer. STD, 2CH, and MP4 modes.) You may not be able to check depending on the version of the P2 viewer. For information on the P2 viewer, please visit: English http://pro-av.panasonic.net/ E-10...
Page 12
Checking detailed information of Aspect ratio: Displays the aspect ratio of recorded data. proxy data TC super: Operation methods and panels may be different Displays whether TC (time code) display is depending on the model or version of the P2 superimposed on recorded video.
Error displays regarding recording of proxy data If an error occurs during proxy data recording, refer to the following for the appropriate action. Error display Operation and causes Action Viewfinder and LCD monitor) PROXY BOARD ERROR The proxy data is not recorded correctly. Recording of the proxy data will stop, but Check the playback of the record after recording of the material will continue.
Page 14
About copying proxy data to SD Memory Cards Copying clips to an SD memory card 1. Press the THUMBNAIL button to display the thumbnail screen. 2. Position the pointer over the clips to be copied using the cursor buttons, and press the SET button. 3.
Specifications Video encoder board Dimensions (W a H a D) Video compression format: Approx. 135 mm a 18 mm a 52 mm MPEG4 Simple Profile ( Appro x. 5-5/16 inches a H.264/AVC Baseline Profile 11/16 inches a 2-1/16 inches) H.264/AVC High Profile (excluding fittings) Audio compression format: Mass: Approx.
Page 16
AJ-YDX30G を取り付ける際は、 必ず販売店に ご相談ください。 QuickTime および QuickTime ロゴはライセン 本製品に関するソフトウェア情報 スに基づいて使用される Apple Inc. の商標ま 1. 本製品には、 GNU General Public License たは登録商標です。 ( GPL )ならびに GNU Lesser General Public License ( LGPL )に基づきライセンスされる 本書内のイラストについて ソフトウェアが含まれており、お客様は、こ カメラ本体、メニュー画面などのイラストは、 れらのソフトウェアのソースコードの入手・ 実際とは異なることがあります。 改変・再配布の権利があることをお知らせい たします。 用語について ソースコードの入手については、下記のホー...
AJ-HPX3100G への取り付け AJ-YDX30G を取り付ける際は、必ず販売店にご相談ください。 AJ-HPX3100G の電源が OFF になっている AJ-HPX3100G の正面から見て右側のねじ ( A ) 5 本、およびねじ( C : 2.6 mm 径黒色 ことを確認してください。バッテリー、あ るいは DC IN 端子に入力がないことを確認 ねじ) 4 本を外し、 R サイドパネルを外し ます。 R サイドパネルをはずしたときに束 してください。 線、 FFC に負荷がかからないように注意し AJ-HPX3100G 底面のねじ( A : 3.0 mm 径...
Page 20
基板が斜め差しになっている場合、カメラレ ねじ( B )を 1 本外し、 INT CONNECT 基 コーダーが記録障害などを起こす場合があり 板を外してから、 BACKEND 基板を外しま ます。 す。このとき、サイドコンタクトに手を触 れないよう、注意してください。 PB COVER を元の位置に戻し、 で外し た箇所をねじ( B )で止めます。 サイドコンタクト サイドパネルを元の位置に戻し、 、 、 ねじ( B ) で外した箇所をねじ( A 、 C )で止めま す。 < ノート > L サイドパネルを取り付ける際、線材に 負荷がかからないよう、またコネクター...
定 格 ビデオエンコーダーボード 外形寸法(幅 a 高さ a 奥行き) : ビデオ圧縮フォーマット : MPEG4 Simple Profile 約 135 mm a 18 mm a 52 mm H.264/AVC Baseline Profile 質量 : 約 52 g H.264/AVC High Profile ファイルフォーマット : MP4 ( ISO/IEC14496 規格) オーディオ圧縮フォーマット : AAC-LC MOV (...
Page 31
TERMS AND CONDITIONS FOR COPYING, _ GNU GENERAL PUBLIC LICENSE DISTRIBUTION AND MODIFICATION Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 0. This License applies to any program or other work which 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public Everyone is permitted to copy and distribute verbatim copies...
Page 32
These requirements apply to the modified work as a whole. 4. You may not copy, modify, sublicense, or distribute the If identifiable sections of that work are not derived from the Program except as expressly provided under this License. Program, and can be reasonably considered independent Any attempt otherwise to copy, modify, sublicense or and separate works in themselves, then this License, and its distribute the Program is void, and will automatically...
Page 33
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
Page 34
LGPL _ GNU LESSER GENERAL PUBLIC LICENSE Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company Version 2.1, February 1999 cannot effectively restrict the users of a free program by obtaining Copyright (C) 1991, 1999 Free Software Foundation, Inc.
Page 35
TERMS AND CONDITIONS FOR COPYING, d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program DISTRIBUTION AND MODIFICATION that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good 0.
Page 36
If distribution of object code is made by offering access to b) Use a suitable shared library mechanism for linking with copy from a designated place, then offering equivalent the Library. A suitable mechanism is one that (1) uses at access to copy the source code from the same place run time a copy of the library already present on the satisfies the requirement to distribute the source code, even...
Page 37
9. You are not required to accept this License, since you have 13.The Free Software Foundation may publish revised and/or not signed it. However, nothing else grants you permission new versions of the Lesser General Public License from to modify or distribute the Library or its derivative works. time to time.