Fixing On The Floor - Panasonic KX-TD500 Installation Manual

2.2.5

Fixing on the Floor

Setting Out and Drilling
288 mm
Location of the anchor plug (A):
2-24 Installation
316 mm
(A) 262 mm
54 mm 54 mm
1. Drill the hole for the anchor plug on the floor in accordance with
the measurements.
2. Drive the anchor plug into the hole.
Note: When fixing the KX-TD500 System to the floor, anchor plugs should
always be used to prevent the system from falling over.
52 mm
334 mm
Basic Shelf*
Expansion Shelf*
1
*
With CPU and T-SW cards
33 mm
2
*
Without cards
Hole
6.4 mm
430 mm (Basic system)
730 mm (2-Shelf system)
1030 mm (3-Shelf system)
35 mm
Shelf Weight
1
20.4 kg
2
12.6 kg
Hammer
Anchor plug
29 mm