Table of Contents
Advertisement
GPS Settings
The Navigator uses the GPS receiver to pinpoint
your location. GPS signals are automatically acquired
, and your vehicle's location and position are
constantly updated. The GPS may take a few
minutes to find its initial location. For best results,
ensure that the GPS has a clear view of the sky.
This screen displays the following GPS information:
• Longitude - The angular distance east or west on
the earth's surface, as measured in degrees from
the meridian of a particular point to the prime
meridian of Greenwich, England.
• Latitude - The angular distance, measured north of
south from the equator, of a point on the earth's
surface.
• Speed - The rate of movement, as expressed by
kilometers or miles per hour.
• Altitude - The height above sea level.
• The green lines that appear on the satellite image
represent the satellites that are sending GPS sig-
nals to your receiver.
Units of Measure
From the Settings menu, click the Units of Measure
button to specify the system's units of measurement.
• Miles/Hour
• Kilometers/Hour
Navigation settings
59
Advertisement
Table of Contents
