Getting started
Using the cradle for data synchronisation
Before synchronising data between your Pocket PC and computer for the
first time you will need to install the ActiveSync software on your computer
(see "Installing ActiveSync on your computer").
Data synchronisation
► Switch the computer on.
► Place the Pocket PC in the cradle (1).
► Connect the USB cable to the data synchronisation port of the cradle (2).
► Connect the USB cable to one of the USB ports of your computer (3).
The Pocket PC is now connected to your computer. The ActiveSync partnership
between your Pocket PC and your computer is established.
► If the battery charge level of your Pocket PC is low you should connect the mains adapter
(see
"Connecting the mains adapter and charging the battery", Page
More information on data synchronisation can be found in the help file on your Pocket PC.
26
3
1
2
19).
A26391-K182-Z120-1-7619, edition 2