16
en | Quick install
3.4.1
Reset startup wizard
Figure 3.3: Startup wizard reset
If required, select the check box here to activate the Startup wizard after the next system
restart (this is only useful if you need to reconfigure the system during the next startup).
Later, during operation, you can also reset this mode in the General screen.
Click <Next step> for the next Startup wizard screen (General settings).
3.4.2
General
Figure 3.4: Startup general
Check the general settings on this screen:
–
2013.11 | 1.1 | AM18-Q0668
If they are correct, click <Next step> to go to the next Startup wizard screen (Encoder
settings).
Quick Reference Guide
DIVAR AN 3000 / DIVAR AN 5000
Bosch Security Systems