Cleaning The Server Enclosure - Fujitsu PRIMERGY CX400 M4 Operating Manual

Starting up and operation
6.4

Cleaning the server enclosure

V
CAUTION!
Switch the server enclosure off and disconnect the power plugs from the
properly grounded power outlets.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server enclosure and the monitor are clear.
Do not use any cleaning sprays (including flammable types). It may
cause a device failure or a fire.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server enclosure and monitor casing with a dry cloth. If particularly
dirty, use a cloth that has been moistened in a mild domestic detergent and then
carefully wrung out.
68 Operating Manual
CX400 M4