Mount Allocation Using Fpwin Gr7; Mount Registration Of A Unit To Be Used And The Starting Word Number3-7 - Panasonic AFP7PSA1 User Manual

3.3 Mount Allocation Using FPWIN GR7

3.3.1 Mount Registration of a Unit to be Used and the Starting Word Number
 What is mount registration?
If all units to be used are physically at hand, you can connect FPWIN GR7 online to the FP7
CPU unit, read the actual mount status, and complete registration.
 Allocation method
Mount registration of the unit to be used and the initial I/O number are set in the following
procedure.
PROCEDURE
1. From the menu bar, select "Online"  "Online Editing".
The screen is switched to the "Online Editing" mode.
2. Select "Option"  "FP7 Configuration".
3. In the relevant field, select "I/O Map".
The "I/O Map" dialog box is displayed.
4. Press the [Mount Registration] button.
The mount status is read, and the read I/O map is registered in the CPU unit.
KEY POINTS

Following the mount registration operation, the system automatically reads
the unit attachment status, formulates an I/O map, and enters the initial
word number.

The I/O map that has been mount-registered using FPWIN GR7 is registered
into the CPU unit, together with other project information. If a difference
with the actual units and/or attachment status is identified when power
supply is turned on or during operation, such a difference is reported as a
self-diagnosis error.

If a starting word number is not entered, the system automatically enters
one.

Based on the starting word number allocated to each unit, I/O numbers are
allocated.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
3.3 Mount Allocation Using FPWIN GR7
3-7