For European countries only Uncertainty (K) : 3 dB(A) The noise level under working may exceed 80 dB (A). Makita declares that the following Machine(s): Designation of Machine: Cordless Recipro Saw WARNING: Wear ear protection. Model No./ Type: JR103D, JR105D...
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium Use personal protective equipment. Always 24.2.2015 wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions Prevent unintentional starting. Ensure the Yasushi Fukaya...
Page 4
for the material and application you are work- when used with another battery pack. ing with. nated battery packs. Use of any other battery 15. Some material contains chemicals which may be toxic. Take caution to prevent dust inhala- tion and skin contact. Follow material supplier When battery pack is not in use, keep it away safety data.
Charge the battery cartridge with room tem- The tool will automatically stop during operation if the perature at 10 °C - 40 °C (50 °F - 104 °F). Let tool and/or battery are placed under one of the following a hot battery cartridge cool down before conditions: charging it.
Page 6
CAUTION: Always clean out all chips or foreign source of light directly. matter adhering to the blade, blade clamp and/or slider. For Model JR103D 1. Lamp Pull the switch lever/trigger to light up the lamp. The lamp keeps on lighting while the switch lever/trigger is 1.
Page 7
CAUTION: If you do not insert the recipro saw blade deep enough, the recipro saw blade may be ejected unexpectedly during operation. This can be extremely dangerous. NOTE: JR103D. 1. Recipro saw blade 2. Hex wrench 3. Hole for recipro saw blade 4.
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. allow the tool to bounce. Bring the recipro saw blade...
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool The use of any other accessories or attachments might present a risk of for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center.
Page 12
M a k i t a J a n - B a p t i s t V inkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan 885441-910 w w w . m a k i t a . c o m...