Quick Setup Guide
Plug in the hub (KX-HNB600), then wait for
1
the LED indicator on the hub to stop
blinking and stay lit in yellow.
Download the Home Network app, then tap
2
its icon to start the app.
www.panasonic.net/pcc/support/tel/homenetwork/
Search for
"Panasonic Home Network System"
"iPhone only" category.
Search for
"Panasonic Home Network
System".
Tap [Set up the Hub].
3
When prompted, press the [Wi-Fi SETUP]
4
button on the hub.
The LED indicator on the hub will begin blinking in
yellow.
PNQW4531ZA
CC0415WK0
Home Network System
in the
Set up the Hub
www.panasonic.net/pcc/support/tel/homenetwork/manual/
User's Guide direct access URL:
5
iPhone/iPad
Android users: Skip this step
5.1
Press the home button on your mobile device to close the Home Network app.
5.2
Change your mobile device's Wi-Fi setting.
Open the [Settings] app, tap [Wi-Fi], select "KX-HNB600_Panasonic", enter "00000000" as the
password, and then tap [Join].
5.3
Start the Home Network app again.
If prompted, enter the password for your
6
wireless router and then tap [Next].
When prompted, press the [Wi-Fi SETUP]
7
button on the hub.
Follow the on-screen instructions and set
8
the remote login password.
This password is used to access the system when
you are away from home.
Follow the on-screen instructions and
9
complete the setup.
The app's home screen is displayed.
Enjoy your Home Network System!
10
www.panasonic.co.uk/support
Panasonic Support Site: