Advanced Features - Bosch BCC100 User Manual

Advanced Features

Advanced Settings is designed for HVAC professionals who
want to modify advanced features for better unit control. It
will also allow the user to reset the device to factory
settings. Advanced Settings requires an access code.
IP: IP Address
Ability to manually type in IP address
RS: Factory Reset
Factory reset the device to original condition
SC: Sensor Calibration
Calibrate or correct the device temperature readings
IS: Initial Setup
Pull-up Initial Setup screen
WRS: Wi-Fi Factory Reset
Factory reset the Wi-Fi module to original condition
RF: System Backup
Store current firmware in the flash to be used
during recovery
(1) For Professional Operation Only, Access Code: 1886
(1)
28