Wired Device Installation
FJ-RC-WIFI-1NA
Note*: This is a Master or Slave relationship. Set the Fujitsu RC or Intesis device to either Master or Slave. Do NOT set both to
the same mode.
(SLAVE)
(MASTER)
Installation Example For Wall Mounted Type Indoor units
Connecting Wi‐Fi device (FJ‐RC‐WIFI‐1NA) to different size indoor units (ASU's)
1)
UTY‐WIFI plug and Wi‐Fi device is necessary. Refer to compatibility chart for more information.
2)
UTY‐WIFI plug, Interface Board and Wi‐Fi device is necessary. Refer to compatibility chart for more
information.
1)
FJ‐RC‐WIFI‐1NA
Field Supplied
2)
FJ‐RC‐WIFI‐1NA
Field Supplied
5
UTY‐ WIFI
UTY‐ WIFI
RED
1
F
2
3
BLACK
ASU12RLF Indoor Board
RED
1
2
3
BLACK
Connecting Wire
ASU18RLB Indoor Board
UTY‐ WIFI
Interface Board