I/O Monitor - Panasonic AFPE224300 User Manual

7.1 I/O monitor

1. I/O status of "WX0" and "WY0" can be monitored using 1
- Example:
Note: 1. "Y6" or higher does not exist for the FP-e external output, but it can be used as the
contact on the program.
2. In case of forced input/output, the monitoring of the forced input contact is not available.
2. Temperature display of the thermocouple input can be monitored using 2
- Example:
Note: Turning Y37 contact ON displays the Fahrenheit degree. (ºF)
3. The front switches can be used as the input contacts "X30" to "X37."
Note: 1. The front switches are allocated as the input contacts "X30" to "X37" and "X38" to "X3F."
"X30" to "X37": The switch can be locked using the program.
"X38" to "X3F": The switch cannot be locked using the program.
Reference: For further information, see "Locking the Switch" in Appendix A,
2. Pressing the "MODE" switch for about 2 seconds displays the "LOCK."
In this condition, the input contacts "X30" to "X37" cannot be used, but "X38" to "X3F"
can be used.
7-2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
"I/O Allocation" of this manual.
st
screen.
nd
Screen.