Power-On
1
Use the supplied power cord to connect this unit to an AC power source.
2
Press the POWER button.
To specify the initial state of the unit when it is restarted
Preset mode: The last settings are restored when the unit is restarted. The factory default setting is this mode.
Reset mode:
previous state including those of the [SETUP] menu.
Factory default mode: The factory default settings are restored when the unit is restarted.
Power-Off
Initial Setup
the [SETUP] menu (
Setting the startup mode (
Changing direct patterns (
Setting video and audio input sources (
Setting the video format (
Setting the bus (
Setting the audio output channels (
Setting the audio fader (
Outputting the color bars (
Setting still pictures or movies (
Setting video created on PC (
HD/SD Settings
same time to perform the mixing operation.
To set the system format to HD:
To set the system format to SD:
19