Replacement Modules - GE C60 Instruction Manual

2.2 ORDER CODES
Table 2–7: C60 ORDER CODES (REDUCED SIZE VERTICAL UNITS WITH PROCESS BUS MODULE)
C60 - * ** - *
K3
K4
KE
KF
L0
L1
L3
L4
LE
LF
MOUNT/COATING
2 FACEPLATE/ DISPLAY
POWER SUPPLY
PROCESS BUS MODULE
DIGITAL INPUTS/OUTPUTS
INTER-RELAY
COMMUNICATIONS
(select a maximum of 1 per unit)
For the last module, slot P is used for digital and transducer
input/output modules; slot R is used for inter-relay
communications modules.
Replacement modules can be ordered separately. When ordering a replacement CPU module or faceplate, provide the
serial number of your existing unit.
Not all replacement modules may be applicable to the C60 relay. Only the modules specified in the order codes are
available as replacement modules.
NOTE
Replacement module codes are subject to change without notice. See the ordering page at
http://www.gegridsolutions.com/multilin/order.htm
NOTE
2-14
* * - F ** - H ** - M ** - P/R
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
V | | | | |
B | | | | |
F | | | |
K | | | |
M | | | |
Q | | | |
U | | | |
L | | | |
N | | | |
T | | | |
V | | | |
W | | | |
Y | | | |
I | | | |
J | | | |
H | | |
L | | |
XX | XX
| 81 |
C60 Breaker Protection System
** Reduced Size Vertical Mount (see note regarding P/R slot below)
| IEEE 1588, PRP, IEC 60870-5-103, and IEC 61850
| IEEE 1588, PRP, IEC 60870-5-103, EGD, and IEC 61850
| IEEE 1588, PRP, IEC 60870-5-103, and two PMUs
| IEEE 1588, PRP, IEC 60870-5-103, IEC 61850, and two PMUs
| IEC 60870-5-103, IEEE 1588, PRP, and CyberSentry Lvl 1
| IEC 60870-5-103, IEEE 1588, PRP, CyberSentry Lvl 1, and EGD
| IEC 60870-5-103, IEEE 1588, PRP, CyberSentry Lvl 1, IEC 61850
| IEC 60870-5-103, IEEE 1588, PRP, CyberSentry Lvl 1, EGD, and IEC 61850
| IEC 60870-5-103, IEEE 1588, PRP, CyberSentry Lvl 1, and two PMUs
| IEC 60870-5-103, IEEE 1588, PRP, CyberSentry Lvl 1, IEC 61850, and two PMUs
| Vertical (3/4 rack)
| Vertical (3/4 rack) with harsh environmental coating
| English display
| Enhanced front panel with English display
| Enhanced front panel with French display
| Enhanced front panel with Russian display
| Enhanced front panel with Chinese display
| Enhanced front panel with English display and user-programmable pushbuttons
| Enhanced front panel with French display and user-programmable pushbuttons
| Enhanced front panel with Russian display and user-programmable pushbuttons
| Enhanced front panel with Chinese display and user-programmable pushbuttons
| Enhanced front panel with Turkish display
| Enhanced front panel with Turkish display and user-programmable pushbuttons
| Enhanced front panel with German display
| Enhanced front panel with German display and user-programmable pushbuttons
| 125 / 250 V AC/DC power supply
| 24 to 48 V (DC only) power supply
| None
| Eight-port digital process bus module
XX None
4A 4 Solid-State (no monitoring) MOSFET outputs
4B 4 Solid-State (voltage with optional current) MOSFET outputs
4C 4 Solid-State (current with optional voltage) MOSFET outputs
4D 16 digital inputs with Auto-Burnishing (maximum of three modules within a case)
4L 14 Form-A (no monitoring) Latching outputs
67 8 Form-A (no monitoring) outputs
6A 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs
6B 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs
6C 8 Form-C outputs
6D 16 digital inputs
6E 4 Form-C outputs, 8 digital inputs
6F 8 Fast Form-C outputs
6G 4 Form-A (voltage with optional current) outputs, 8 digital inputs
6H 6 Form-A (voltage with optional current) outputs, 4 digital inputs
6K 4 Form-C and 4 Fast Form-C outputs
6L 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs
6M 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs
6N 4 Form-A (current with optional voltage) outputs, 8 digital inputs
6P 6 Form-A (current with optional voltage) outputs, 4 digital inputs
6R 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs
6S 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs
6T 4 Form-A (no monitoring) outputs, 8 digital inputs
6U 6 Form-A (no monitoring) outputs, 4 digital inputs
6V 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputs
2A C37.94SM, 1300 nm single-mode, ELED, 1 channel single-mode
2B C37.94SM, 1300 nm single-mode, ELED, 2 channel single-mode
2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel
2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels
2I Channel 1 - IEEE C37.94, multimode, 64/128 kbps; Channel 2 - 1300 nm, single-mode, Laser
2J Channel 1 - IEEE C37.94, multimode, 64/128 kbps; Channel 2 - 1550 nm, single-mode, Laser
72 1550 nm, single-mode, Laser, 1 Channel
73 1550 nm, single-mode, Laser, 2 Channel
74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, Laser
75 Channel 1 - G.703; Channel 2 - 1550 nm, single-mode Laser
76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel
77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels
7A 820 nm, multimode, LED, 1 Channel
7B 1300 nm, multimode, LED, 1 Channel
7C 1300 nm, single-mode, ELED, 1 Channel
7D 1300 nm, single-mode, Laser, 1 Channel
7E Channel 1 - G.703; Channel 2 - 820 nm, multimode
7F Channel 1 - G.703; Channel 2 - 1300 nm, multimode
7G Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED
7H 820 nm, multimode, LED, 2 Channels
7I 1300 nm, multimode, LED, 2 Channels
7J 1300 nm, single-mode, ELED, 2 Channels
7K 1300 nm, single-mode, Laser, 2 Channels
7L Channel 1 - RS422; Channel 2 - 820 nm, multimode, LED
7M Channel 1 - RS422; Channel 2 - 1300 nm, multimode, LED
7N Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED
7P Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, Laser
7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode Laser
7R G.703, 1 Channel
7S G.703, 2 Channels
7T RS422, 1 Channel
7W RS422, 2 Channels
for the latest options.
2 PRODUCT DESCRIPTION

2.2.4 REPLACEMENT MODULES

GE Multilin