Table of Contents
Advertisement
7.
After the password is accepted the Bluetooth device will be
paired to the phone and stored in the list of devices.
8.
Note: please consult the user manual of your Bluetooth
accessorory for the PIN if it is not 0000.
Transmitting Data via Bluetooth
1.
Open the folder containing the file you wish to send, (for
example, open My Stuff if you want to send a picture to
another device), select the file you wish to send.
2.
Select OPTION and SEND and then select VIA BLUETOOTH
3.
The phone will display the device list, allowing you to select
which Bluetooth device you send it to. Note: in order to send a
file via Bluetooth your device must be paired with the
receiving device in advance. See instructions on pairing
above.
4.
If the object device requires a password, the phone will
prompt you to input.
5.
After the devices are paired, the phone will display a prompt of
Sending File.
Data Account Settings (DO NOT MODIFY)
1.
Main menu > Setting >Connection Settings > Data Account.
2.
Select a data account and select the MENU KEY to view the account
info, including account name, access point, authentification type,
user's name and password.
3.
If desired to create a new data account, select OPTION and CREATE
4.
Input the option, input account setting parameters, and settings and
select SAVE.
Reset Settings
There are two types or reset options; partial or full. A partial recovery
67
Advertisement
Table of Contents
