Table of Contents
Related Manuals for LG LRV790R
Summary of Contents for LG LRV790R
- Page 1 OWNER’S MANUAL Hom Bot Before using, please carefully read the Safety Precautions pages to allow for safe operation of the product. After reading the operation manual, please keep it in an easily accessible location. LRV790R www.lg.com...
- Page 2 TABLE OF CONTENTS Hom Bot WARRANTY ADDITIONAL INFORMATION LG Hom Bot WARRANTY 36~38 Troubleshooting Before you call for service BEFORE USE REFERENCE Features Product specifications Safety precautions Open source software notice Included with product Parts 10~11 Button functions Display status...
- Page 3 LG Hom Bot WARRANTY LG Electronics Inc. will repair or replace your product, at LG’s option, if it proves to be defective in material or workmanship under personal household use, during the warranty period set forth below, effective from the date of original consumer purchase of the product.
-
Page 4: Location Search Function
FEATURES Corner Master By having adopted a brand new concept design that prevents the Hom Bot from bumping into walls, the Hom Bot's cleaning performance is incredibly efficient. Learning Mode The Hom Bot is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning. -
Page 5: Safety Precautions
3. If the supply cord is damaged, it must be replaced by an LG Electronics Service Agent in order to avoid a potential hazard. 4. This appliance can be used by children aged from 8... - Page 6 Failure to follow this warning can cause electric shock, fire or product failure. If the power cord is broken, do not plug it in. Take the product to an LG Electronics Authorised service repairer. • Always use a dedicated power outlet with a 10 amp •...
- Page 7 Doing so can cause product failure. Doing so can cause product failure. If liquids get inside of the Hom Bot, turn off the power supply and contact an LG Electronics sales agent or the LG customer care center.
- Page 8 SAFETY PRECAUTIONS CAUTION • When the Hom Bot is operating, it may hit a chair leg, • If the floor is wet or has wet spots, wipe them up before using the Hom Bot. Do not use the Hom Bot on a wet desk leg, table leg or other narrow pieces of furniture.
-
Page 9: Included With Product
After reading the operation For more detail, please refer to the user manual. manual, please keep it in an easily accessible location. Please read this manual carefully before installing and operating the product. www.lg.com www.lg.com Cleaning tool Dust bin filter (spare) - Page 10 PARTS - Hom Bot Top view Upper camera sensor Dust bin cover Display & Manipulation button Dust bin cover button Front view Ultrasonic sensors Obstacle detecting sensor window, Detecting sensors of home station and Receiving sensors of remote control Rear view Power switch Ventilation port Bottom view...
- Page 11 PARTS – HOME STATION / DUST BIN Home station Remote control holder Charging terminal Power cord fixing hook Dust bin Dust bin handle Cleaning brush Dust bin cover Suction port flap Sponge filter Dust bin cover opening button HEPA filter Filter cover s Images may vary by model.
- Page 12 BUTTON FUNCTIONS – Hom Bot • Press to activate Turbo Mode. TURBO • Press again (while in Turbo Mode) to deactivate Turbo Mode. • After the power switch is in the ON position, press the Start/Stop button to start cleaning. START/STOP •...
- Page 13 BUTTON FUNCTIONS – REMOTE CONTROL Start Home Start cleaning. Send the Hom Bot to the home station. Mode Turbo Change the cleaning mode. Activate or deactivate Turbo Mode. Directional button This button enables manual operation or selection of Stop an area in the My Space Stop cleaning, cancel a cleaning cleaning mode.
-
Page 14: Display Status
DISPLAY STATUS Mute Battery level Lock AM/PM Schedule (One Time or Every Day setting) Turbo Repeat cleaning Home station Zigzag cleaning My Space cleaning Cell by Cell cleaning Spot cleaning Time display • The Hom Bot will default to the last clean mode selected. -
Page 15: Before Operating
BEFORE OPERATING Before cleaning • Do not use this device in a room where a child is left alone. The child could be injured. • Remove fragile or unnecessary objects from the room to be cleaned. ; especially expensive ceramics and valuables in risk of being knocked over. •... -
Page 16: Overview
OVERVIEW Install the home station. 4.5 Insert the power cord plug into an outlet and locate the 6 station against a wall. If power is not supplied to the 4.5 home station, the Hom Bot will not charge. Turn on the power supply of the Hom Bot. -
Page 17: How To Install The Home Station
Do not operate the Hom Bot if the home station has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. To avoid hazard, the cord must be replaced by LG Electronics, Inc. or a qualified service person. -
Page 18: How To Turn The Hom Bot Power Supply On & Off
HOW TO TURN THE Hom Bot POWER SUPPLY ON & OFF Turning on the main power supply Flip the power switch to the ON position. ※ Do not press the Start/Stop button at the same time as flipping the power switch. Doing so may delay the operation. ※... -
Page 19: How To Start And Stop Cleaning
HOW TO START AND STOP CLEANING Using the buttons on the Hom Bot After the Hom Bot is turned on, press the START/STOP button to begin cleaning. A melody will sound and cleaning will begin. Press the START/STOP button during the cleaning cycle to stop cleaning. -
Page 20: How To Charge The Battery
HOW TO CHARGE THE BATTERY Automatic charging The Hom Bot returns to the home station at the end of a cleaning cycle or when its battery is running low. ※ If 10 minutes elapse without the Hom Bot moving or the battery is too low, the Hom Bot will automatically go into standby mode. - Page 21 HOW TO CHARGE THE BATTERY Battery Level Indicator The battery life level is located on the status display: • If recharging is in progress, the battery level icon flickers. • If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save energy. •...
-
Page 22: Cleaning Modes
CLEANING MODES Zigzag Cleaning In Zigzag mode, the Hom Bot zigzags through each spot of the cleaning area. Select the Zigzag mode to quickly clean an area. To select Zigzag mode: Press the Mode button continuously, on either the Hom Bot or remote control, until the Zigzag icon illuminates. - Page 23 CLEANING MODES My Space Cleaning My Space cleaning allows you to manually select the area in which the Hom Bot will clean. To select My Space: 1. Press the My Space button. 2. Using the arrow buttons on the remote control, guide the Hom Bot around the perimeter of the space you would like cleaned.
-
Page 24: Auxiliary Cleaning Modes
AUXILIARY CLEANING MODES Manual cleaning Manual mode allows you to move the Hom Bot manually to the front, back and either side using the arrow buttons on the remote control. While in Manual mode, the Hom Bot will run into obstacles placed behind it if the back arrow key on the remote control is held down. - Page 25 AUXILIARY CLEANING MODES Turbo Mode In 'Turbo' mode, the Hom Bot cleans more powerfully. Activate this mode by pressing the 'Turbo' button on the remote control, or on main body. You can cancel by pressing the 'Turbo' button again. ※ <Turbo Mode (Floor Master Function)> ‘Turbo mode’...
-
Page 26: Time Setting
TIME SETTING You can set the current time on the Hom Bot. Pressing ‘Clock' button on Remote control, when Hom Bot is waiting, will start the current time setting. Set the time units by using 'uv' buttons Flickering on Remote control. Set the unit of minutes using 'uv' Flickering buttons on Remote control. -
Page 27: Scheduled Cleaning
SCHEDULED CLEANING You can schedule a cleaning so that the Hom Bot starts cleaning at a scheduled time. Pressing 'Schedule' button on Remote control, when the battery is recharging, will start the scheduled cleaning setting. Setting/Cancelling the reservation is only possible when the unit is recharging. Select 'One Time' or 'Everyday' option by Flickering using 'uv' buttons on Remote control. -
Page 28: Mop Cleaning (Option
MOP CLEANING (OPTION) By attaching the ultra microfiber mop, you can effectively use the Hom Bot to remove dust. When the mop plate is attached, the Hom Bot will not climb on to carpets or over thresholds, in order to prevent transferring dirt from the mop. Caution Do not cover the bottom camera with the microfiber mop. -
Page 29: Location Search Function
LOCATION SEARCH FUNCTION The Hom Bot remembers its location while cleaning. If the user moves the Hom Bot while it is operating, it will search for the location it was moved from by using its navigational location search function before continuing to clean. -
Page 30: Smart Diagnosis
SMART DIAGNOSIS Hom Bot uses the Smart Diagnosis feature to run selfdiagnosis. If any irregularity is found from the diagnosis, please contact the local LG Electronics service center. ※ During Smart Diagnosis, the Hom Bot will move within a 1.64 ft radius. So, make sure no objects are in the way within a 1 m radius around the Home Station, before starting Smart Diagnosis. - Page 31 LG Electronics service center. from the main power switch on the bottom of the Hom Bot. If the problem continues, please contact LG Electronics customer care. Charging cannot be done due to a problem in ultrasonic sensor.
-
Page 32: Cleaning The Dust Bin
CLEANING THE DUST BIN If the dust bin is full, suction power will be reduced. Clean the dust bin before and after each cleaning session. Clean the dust bin using the following sequence: 1. Open the dust bin cover by pressing the PUSH button on the Hom Bot. -
Page 33: Cleaning The Dust Bin Filter
CLEANING THE DUST BIN FILTER The Dust Bin Filter consists of a HEPA Filter and Sponge Filter. Clean both the HEPA and Sponge filters as per the following sequence. 1. Pull the hook on the left of the HEPA Filter module on the rear side of Dust Bin to separate the HEPA Filter and the sponge. -
Page 34: Cleaning The Brush
CLEANING THE BRUSH The rotating Brush, located on the bottom of Hom Bot, helps collect the dust. Clean the Brush as per the following sequence. ※ Before turning over the main unit, lay a soft cloth on the floor and remove the Dust Bin. Otherwise, the main unit can get scratches and dust will fall from Dust Bin. -
Page 35: Cleaning The Sensor/Charging Terminal
CLEANING THE SENSOR/CHARGING TERMINAL There are sensors on the Hom Bot that detect obstacles, stairways and the home station for charging the battery. In order to maintain the performance of the Hom Bot, regularly clean the sensors and charging terminal as follows: 1. -
Page 36: Cleaning The Side Brush
CLEANING THE SIDE BRUSH Foreign objects/materials such as hair can easily adhere to the side brush. Remove such materials at least once a week. If excessive amounts of foreign materials are stuck to the brush, there is the risk of damage to the brushes. If the floor is rough or walls are frequently cleaned, the side brush may bend or become damaged. -
Page 37: Cleaning The Ultra Microfiber Mop (Option
※ If the Mop is used in a damp or wet state, it will cause the Hom Bot to malfunction. • To avoid product malfunction, only use the ultra microfiber mop provided with the Hom Bot. • Additional microfiber mops can be purchased by visiting a nearby LG Electronics service center. -
Page 38: Troubleshooting
TROUBLESHOOTING Upon a voice message, "The wheels are not touching the floor. Please move Hom Bot onto flat floor." A warning message will be given if a wheel does not contact the floor surface for any reason. • Is a wheel trapped in the front door, balcony, stairway, etc? s Move the Hom Bot on to the flat floor. - Page 39 TROUBLESHOOTING Upon a voice message, "Please check that the dust bin and filter are properly installed." A warning message will be given if there is no Dust Bin or Filter Cover fitted. • Is the Dust Bin fitted to the Hom Bot? s Open the Dust Bin Cover and check to ensure the Dust Bin is in place.
- Page 40 TROUBLESHOOTING Upon a voice message, "Please remove any foreign material from the brush on the bottom of the Hom Bot." A warning message will be given if foreign materials restrict the Brush's rotation. Lay a soft cloth on the floor and put the Hom Bot upside down on it. ※...
-
Page 41: Before You Call For Service
BEFORE YOU CALL FOR SERVICE Confirm before reporting the failure of Hom Bot. Problem Solutions (Reference page) The power supply cannot be Check that the power switch is turned on. (Page 16) turned on. The power supply This is not a failure. Hom Bot has its own power saving function. automatically turns off. -
Page 42: Product Specifications
PRODUCT SPECIFICATIONS Item/Model LG Hom Bot LRV790R External Dimensions 13.3 in × 13.3 in × 3.5 in Weight 6.6 lb Power Consumption 18 W Battery (Fully Charging) DC 16.8 V Traveling Velocity 13.8 in/sec Use Time Approx. 100 minutes (Based on general wooden floor) - Page 43 REFERENCE ITEMS Open source software notice To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
- Page 44 Disposal of waste batteries/accumulators 1. When this crossedout wheeled bin symbol is attached to batteries/accumulators of Your product it means they are covered by European Directive 2006/66/CE. 2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains more that 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead.
- Page 45 MEMO...
- Page 46 MEMO...
- Page 47 MEMO...
- Page 48 Made in Korea...