Configuring The Device - Bosch Plug AA Instruction Manual

5.3 Configuring the device

Scanning the QR code from within the
app starts the configuration process.
LED state
Flashes green once
Flashes orange
20
The plug's LED indicates the status
of the configuration attempt using the
following flash codes:
Explanation
Successful configuration
Unsuccessful configuration
If the device is not able to establish a connection to the controller
within 3 minutes, the configuration mode is ended.
To start the configuration mode again, please press the system button
on the plug.
The app will also inform you if the
configuration was successful.
21