Controlling Cameras - Bosch MVC-FIPM Installation And Operating Manual

IP Matrix
4.4

Controlling Cameras

You can operate controllable cameras using the joystick, provided they are connected to the
active monitor.
1.
2.
Camera Configuration
If the camera offers an OSD menu, you can configure the camera via this menu.
1.
2.
3.
Camera Overlays
You can switch text overlays such as sector and tour titles on or off.
1.
2.
3.
Presets
For controllable cameras, you can store and access presets.
1.
2.
3.
4.
5.
6.
Using Aux Commands
You can transmit Aux commands to the camera.
1.
2.
3.
4.
Bosch Security Systems
www.a1securitycameras.com email: sales@a1securitycameras.com
Press the joystick in the required direction to pan or tilt the camera. If you press more
firmly, the camera motion will speed up.
Turn the joystick to zoom in or out.
Press the Camera Menu softkey to switch to the camera menu.
Press the Show OSD Menu softkey. The configuration menu of the active camera is
displayed on the monitor.
Follow the instructions on the monitor to configure the camera.
Press the Camera Menu softkey to switch to the camera menu.
Press the OSD On softkey to switch the overlays on.
Press the OSD Off softkey to switch the overlays off.
Press the Camera Menu softkey to switch to the camera menu.
Navigate the camera to the required position.
Press the Store Preset softkey and then the number under which you want to store the
preset position.
Press Enter to confirm the storage.
To call up a stored preset, press the Shot function key and then press the corresponding
number.
Press Enter to confirm the selection. The camera moves to the stored preset position.
Press the Camera Menu softkey to switch to the camera menu.
Press the Aux On softkey and then press the number of the Aux command you require.
Press Enter to confirm the selection. The command is executed.
Press the Aux Off softkey to cancel an Aux command currently being executed.
Installation and Operating Manual
Available from A1 Security Cameras
Operation of IP Matrix using the IntuiKey | en
F.01U.082.117 | V4.0 | 2008.12
19