Voice/Fax Tab:
o
Changes from Default settings:
st
1- 1
Codec Priority =
nd
2- 2
Codec Priority =
rd
3- 3
Codec Prioirty =
RTP/RTCP Tab:
o
Same as default
T.38, T.38 Option
o
Same as default
DSP
o
Same as default
Supplementry services:
o
Changes from Default settings:
1- CNIP (Receive) =
Additional DID's
Please set the channel attribute for number of ports depending on the number of
active SIP lines
For example ,if there are 3 Simultaneous calls can be received on this trunk, the
number of V-SIPGW ports to be set as
2 ports
3/21/2013
Rev1
G.711u
G.729a
G.711a
Yes ( All Channels, Basic and Additional)
as"additonal channel for channel
1"
an"additonal channel for channel
1"will be
11