Electrolux 402338 Owner's Manual page 7

5
LOWER CHUTE - MOWER WITH
MOUNTING TAB (See Fig. 5A)
1. Raise and hold defl ector shield in upright position.
2. Place slot in lower chute over tab on mower and position
lower chute over mower opening as shown.
3. Hook rear latch into fl ange hole on back of mower.
4. Hook front latch into tab hole on front of mower.
• If your tractor is equipped with gauge wheels on the
deck, then it will be necessary to hook the rear latch
into the hole in the R.H. gauge wheel bracket.
CAUTION: Do not remove defl ector
shield from mower. Raise and hold
shield when attaching lower chute
and allow it to rest on chute while in
operation.
REAR GAUGE
WHEEL
BRACKET
WITH REAR
GAUGE WHEELS
REAR LATCH
EXTENDED EDGE "B"
Must be under defl ector shield
and along side the hinge bracket
DEFLECTOR
SHIELD
WITHOUT
GAUGE WHEELS
FIG. 5A
7
DEFLECTOR SHIELD
HINGE BRACKET
03058
REAR LATCH
TAB
FRONT
LATCH