Receiver unit replacement
Receiver units are available in sizes 0, 1, 2 and 3. If your receiver does not fit properly, then consult your dispenser.
1
Holding the main unit, pinch the plug of
the receiver unit with an anti-skid pad*
to detach the receiver unit from the main
unit. Do not twist or pull too hard.
Receiver unit
Main unit
Anti-skid pad
* Anti-skid pads are not included in the package.
· Use only the supplied receiver unit. Use of other receivers may cause hearing damage.
CAUTION
· Make sure that the battery has been removed when inserting or removing the receiver unit.
40
(Consult your dispenser)
2
Insert the plug of the receiver securely into
the main unit as indicated in the figure
below. Make sure that the receiver unit is
facing in the right direction.
Plug of the
Main unit
receiver unit