Bosch GWH-635-ES User Manual page 5

Fig. 4 Support correct position
B Using the supplied cable make the
connection between the main PCB
and the remote control PCB as
shown in Fig. 5.
Fig. 5
B Close the control box cover.
B Re-assemble:
6 720 606 990
Using the Remote Control
• the control box in the appliance
• all connections between the PCB
and the appliance
• lower cover in the control box
• holding bracket
• front cover panel.
4.3 Remote Control Activa-
tion
Before
i
control will work it will
have to be activated,
using
described below, and
standing in front of the
appliance.
B Move the main switch on the
appliance to the 0 position.
B Press and hold
same time turn the main switch to
"ON" position (I).
LCD shows one number and one
rotating digit.
The number represents the remote
control which is to be registered, the
first remote control will be registered
with number "0", the second with
number "1" and so on.
the remote
the procedure
key while at the
5